Prospector Brochure_2019.pdf - 第6页
10 | DAGE Micro Ma terials T ester 11 | DAGE Micro Ma terials T ester C us t om T ooling E xpert s DAGE hav e been crea ting custom micr o tooling f or 50 years. Our e xperience in ma terial fabric ation and work holder …
8 | DAGE Micro Materials Tester 9 | DAGE Micro Materials Tester
Accelerate your Workow
Life with Prospector
TM
Prospector is designed for test exibility and ease of use. Operators can perform a wide range of
test types with minimal training.
In the example below six dierent tests were required to isolate the correct failure mode.
Prospector and Paragon™ Materials soware make easy work of even the most complex test plans.
Switch tests fast: Prospector’s auto test setup quickly congures hardware and soware so you’re
ready for the next test.
Optical inspection Scratch Bend & Twist
Optical inspection and
measurement conrms
visual quality
Scratch test reveals
strong coating adhesion
Bend and twist test
conrms excellent
component integrity
PASS
PASS
PASS
!
Everything at your ngertips
With Prospector’s exible test capabilities, you are not limited
to which challenges you can take on!
Multiple tests can be performed by simply changing to a new
test module. You can complete multiple tests in minutes,
without needing to move or reposition your device.
Thermal Creep Bend
Complete
characterization
Testing at extreme
temperatures
demonstrates correct
environmental suitability
Creep testing shows
ability to handle
prolonged loading
Bend testing with
resistance measurements
reveals components
delaminating
Switch test modules in under 10 seconds.
FAIL
PASS
PASS
10 | DAGE Micro Materials Tester 11 | DAGE Micro Materials Tester
Custom Tooling Experts
DAGE have been creating custom micro tooling for 50 years. Our experience in material
fabrication and work holder design is extensive with over 5,000 unique concept designs.
Our tools are manufactured and tested from our UK site. Each tool is individually designed to
meet your exact requirements.
No need to build your own test rigs!
Whether your component is on the micro scale, or a unique shape, we have a work holder capable
of performing your test. If you have a diicult sample to test we can tailor a custom work holder.
Made for Micro
TM
Tackle your micro challenge
Prospector™ supports researchers to take on the most demanding failure analysis applications.
With Prospector, you now have a repeatable method for testing truly micro-components and devices,
down to <0.1N!
Everything you need for the micro world.
1
Align and locate with micro precision.
Easily controlled axes using joystick
operation for independent (or combined)
movement with 100 nm resolution.
Powerful on board optics allow you
to measure features and take videos
during tests.
Drive to test locations using mouse point
and click on the camera image.
Grip delicate micro devices and
components with ease.
Micro tools and jaws can be pneumatically
controlled with variable force.
2
3
10µm
Specications at a Glance
Korea +82 31 462 9642
korea.at.cs@nordson.com
South East Asia +65 6552 7533
sales.sg@nordsondage.com
Taiwan +886 2 2902 1860
globalsales@nordsondage.com
United Kingdom +44 1296 317800
globalsales@nordsondage.com
www.nordsondage.com
Americas + 1 760 930 3307
sales@nordsondage.com
Europe +44 1296 317800
globalsales@nordsondage.com
China +86 512 6665 2008
sales.ch@nordsondage.com
Germany +49 89 2000 338 270
sales.de@nordsondage.com
Japan +81 120 537 555
sales.jp@nordsondage.com
Dedicated thermal
control
Integrated
connectivity
OmniScope
Specications subject to change without prior notice.
Copyright © Nordson 2020. Other products and company
names mentioned are trademarks or trade names of their
respective companies.
DAGE products are patent protected and covered by the
patent listed at www.nordson.com/dagepatents.
BR-BT-10420-V2
Mechanical specication
Z axis resolution and speed 100 nm encoder resolution, 20 mm/s
Z axis force and travel 100 kg, 200 mm (max sample size 285 mm)
X, Y axes speed and travel 6 mm/s, 160x160 mm (50 mm/s option)
Y axis force 200 kg
Test specication
Test modules Pull, push/pull, shear, scratch, torsion, bend
Test modes Cyclic, tensile, compression, force or displacement control
Lowest measurable forces Shear (0.5 g, 0.005 N), Pull (1 g, 0.01 N)
Load cell accuracy Shear (0.1% FSL) Push/Pull (0.1% FSL)
Smallest pneumatic tweezers, shear tools ~50 µm jaw, ~30 µm shear
Optics
Standard conguration Trinocular + high mag. Fracture Camera
Imaging modes Live video, stacked focus and panoramic images
Fracture camera eld of view 10X - 0.68 x 0.51 mm (20X option available)
Fracture camera resolution 2048 x 1536 pixels
Fracture camera measurements User drawn dimensions: width, length, circle etc
Thermal
FlexTc thermal range and sweep rate -55 °C to +155 °C
FlexTc modes Dynamic and isothermal via soware control
FlexTc cooling power and rate 21 W @-40 °C, 50 °C/min
FlexTc maximum sample size 36x36 mm (larger sizes on request)
Hot plate thermal range RT – 400 °C, vacuum or bolt down
Hot plate maximum sample size 50 mm x 50 mm
System dimension
Footprint and weight L693 x W592 x H978 mm, 150 kg
Power supply 100 – 240V AC, 50 – 60 Hz, single phase 240W
Pneumatic supply Minimum 0.4MPa (4 Bar), 6mm OD / 4mm ID plastic pipe
Interface USB, gigabit ethernet