00198545-01_JCPM_WF2_CA4V2_EN.pdf
www.asm-smt.com Preventive Maintenance Workflow 2 SIPLACE CA4 V2 JobCard Edition 08/2018 EN
www.asm-smt.com
Preventive Maintenance Workflow 2
SIPLACE CA4 V2
JobCard
Edition 08/2018 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties
for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198546-01
www.asm-smt.com Printed by ASM Assembly Systems
www.asm-smt.com
Introduction
Safety Introduction
Equipment required for Workflow 2 Maintenance CA4 V2
1 Check the head status of CPP /M and C&P20 A/P/M2
2 Switch off the machine, remove the changeover tables (COT) and ex-
change all nozzles
3 Empty and clean the reject bin
4 Remove the C&P20 M2 head
5 Return a maintained C&P20 M2 head
6 Clean the Z-Axis of the remaining C&P20 A/P/M2 head
7 Check and clean the magnetic surface and scale of the X- and Y-Axis
8 Clean the conveyors, lifting tables and gantry cables
9 Clean / replace the cooling air filter
10 Clean the stationary camera (CPP M)
11 Clean the feeder modules and cut the tapes
12 Switch on the machine and return the changeover tables (COT)
13 Calibrate the C&P20 A/P/M2 head
14 Check the filter discs of C&P20 A/P/M2
15 Check the nozzle seating of CPP /M and C&P20 A/P/M2
16 Endurance run
Table of Contents