npm-w2s_brochure.pdf

Manufacturing Process Innovation Mode l N ame Mode l No .NM-EJM5E N P M - W 2 S *5：Excluding the monitor, signal tower and ceiling fan cover. *6：±25 μm placement support option. （ Under conditions specified by Panasonic …

100%1 / 2
Manufacturing Process Innovation
Model Name
Model No.NM-EJM5E
NPM-W2S
*5：Excluding the monitor, signal tower and ceiling fan cover.
*6：±25 μm placement support option.
（Under conditions specified by Panasonic）
*7：The 03015/0402 chip requires a specific nozzle/feeder.
*8：Support for 03015 mm chip placement is optional.
（Under conditions specified by PFSC,Placement accuracy : ±30 μm/ chip）
Placement head
Placement accuracy（Cpk≧1）
Component dimensions
Max. speed
Tray
Stick
Taping
Component
supply
PCB
dimensions
Tape：4 ∼ 56
mm
Tape
：4
∼
56 / 72 / 88 / 104
mm
Front/rear feeder cart specifications：Max.120（ Tape width and feeder are subject to the conditions on the left）
Tape：4 / 8 / 12 / 16 / 24 / 32 / 44 / 56
mm
Single tray specifications：Max.86（ Tape width and feeder are subject to the conditions on the left）
Twin tray specifications：Max.60（Tape width and feeder are subject to the conditions on the left）
Front/rear feeder cart specifications：Max.15
（Single stick feeder）
（Single stick feeder）
（Single stick feeder）
Single tray specifications：Max.15
Twin tray specifications：Max.15
Single tray specifications：Max.20
Twin tray specifications：Max.40
Max.120（
Tape: 4、8
mm
、 Small real）
03015 0402 chip
∼ L 6 × W 6 × T 3
0603 chip
∼ L 150 × W 25（
diagonal
152）× T 30
*7
0402 chip
∼ L 12 × W 12 × T 6.5
*7
0402 chip
∼ L 32 × W 32 × T 12
*7*7*8
Lightweight 8-nozzle head
±30 μm/ chip
±30 μm/QFP
□
12
mm
∼
□
32
mm
±50 μm/QFP
□
12
mm
Under
±30 μm/ chip
（±25 μm/ chip ）
±30 μm/ chip ±30 μm/ QFP
38 500cph
（0.094 s/
chip
）
32 250cph
（0.112 s/
chip
）
ー
ー
20 800cph
（0.173 s/
chip
）
8 320 cph
（0.433 s/chip）
6 500 cph
（0.554 s/QFP）
Lightweight 16-nozzle head 12-nozzle head 3-nozzle head V2
(mm)
Model ID
Electric source
Pneumatic source
Dimensions
Mass
Batch mounting
Dual
transfer（Batch）
Single transfer（Batch）
Dual transfer（2 position）
Single transfer（2 position）
2 position mounting
L 50
mm
× W 50
mm
∼ L 750
mm
× W 550
mm
L 50
mm
× W 50
mm
∼ L 750
mm
× W 510
mm
L 50
mm
× W 50
mm
∼ L 750
mm
× W 260
mm
L 50
mm
× W 50
mm
∼ L 350
mm
× W 510
mm
L 50
mm
× W 50
mm
∼ L 350
mm
× W 260
mm
L 50
mm
× W 50
mm
∼ L 350
mm
× W 550
mm
3-phase AC 200、220、380、400、420、480 V 2.0 kVA
0.5 MPa、 200 L /min（A.N.R.）
W 1 280
mm
× D 2 477
mm
× H 1 444
mm
2 390 kg（Only for main body:This differs depending on the option configuration.）
*3
*2
*1
*1
*5*4
NPM-W2S
Single-lane
Dual-lane
Electronics Assembly System
catalog
Production Modular
*It may not conform to Machinery Directive
and EMC Directive in case of optional
configuration and custom-made specification.
* Placement tact time,inspection time and
accuracy values may differ slightly depending
on conditions
*Please refer to the specification booklet for details.
*2 : Only for main body
*3 : 1 880
mm
in width if extension conveyors (300
mm
) are placed
on both sides.
*1：Please consult us separately should you connect it to
NPM-D3/D2/D. It cannot be connected to NPM-TT and NPM.
*4：Dimension D including tray feeder : 2 618 mm
Dimension D including feeder cart : 2 513 mm
*6
2020
Basic Specification
Optional functions
NPM-W2S
Model No.NM-EJM5E
Model ID
Directly connectable to NPM-W2
Conventional NPM series comes with one simple beam, allowing for various
operations ranging from an NPM series backup to multiple connection configuration
Support for single-/dual-lane transport
1
Selection of the mounting head according to production form
Selectable from Lightweight16-/12-/Lightweight8-/3-nozzle head V2
2
Mutual compatibility with NPM series
Shared use of the placement head/nozzle, tape feeder and feeder cart
*For details, contact our sales representative.
3
Adoption of 3-nozzle head V2
Capable of a max placement load of 100N.
4
When pickup/recognition error occurred, the
machine automatically corrects the pickup position
without stopping, and resumes production.
That improves machine operation rate.
(Components: 4
mm
embossed (black)/ 8
mm
paper/embossed (black) tape component.
*Embossed tape (transparency) is not supported.)
Recognizes the locations of insertion lead
components, as well as bends in the components,
before placement.
PIP lighting unit
Automatic pick-up error recovery
PIP lighting unit
Recognition images
Conventional
recognition camera
Line with 4 NPM-W2 models + 1 NPM-W2S model
Line with 4 NPM-W2S models
■Operation example 1 (A backup to NPM line)
■Operation example 2 (NPM-W2S connected line)
Automatic feed
Automatic teach
Error
Average
luminance
Pattern
matching
Chamfering
inspection
②Component number inspection ⇒ Detects wrong components, traces components.
Text recognition
(lot number text)
2D code recognition
(lot number text)
①Polarity inspection
⇒
Detects wrong component orientation
TF30
TF30
TF13Tray20
TF30
Twin Tray
20+20
TF30
Rear & Front Feeder Layout
Single Tray Layout
Twin Tray Layout
Inspect tray or reel components before pick-up to
prevent misplacement.
Inspection option before pick-up
Production
Preparation
3-1-1 Inazu-cho, Toyonaka City, Osaka 561- 0854, Japan
TEL +81-6-6866-8675
FAX +81-6-6862-0422
Inquiries…
Safety Cautions
●Please read the User's Manual carefully to
 familiarize yourself with safe and effective
 usage procedures.
● To ensure safety when using this equipment, all work should be
 performed according to that as stated in the supplied Operating
 Instructions. Read your operating instruction manual thoroughly.
Panasonic Group products are built with the environment in mind.
●Changes in specifications and appearance may be made without notice for product improvement.
●Homepage
Panasonic Corporation
Process Automation Business Division
Ver.January 1, 2020
All data as of January 1, 2020
©
Panasonic Corporation 2020
panasonic.com/global/corporate/sustainability
Please check the homepage for the details.
industrial.panasonic.com/ww/fa-jisso