4OM-1286-007_w.pdf - 第134页

2-7 AJQEMT -ID W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 01 1801 Data transfer not ﬁnish It cann’t start because data is not set properly . 01 1901 Head ir…

2-6

AJQEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011001 Empty Feeder (rear)

Please set the feeder (back) that used by the pattern program.

011101 Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

011201

Transfer main loop

Press [POWER ON] button to activate Load Power circuit.

011301

Transfer main loop (backup, wide set)

Press [POWER ON] button to activate Load Power circuit.

011401

Zeroing not ﬁnish

Perform All zeroing

011501

Feeder communication not ﬁnish (rear)

Please wait for a while.

011601 Feeder communication not ﬁnish (front)

Please wait for a while.

011701

PCB position

Please position the PCB

0606-005

2.2 List of Warning Messages

2-7

AJQEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011801 Data transfer not ﬁnish

It cann’t start because data is not set properly.

011901 Head irregular comp. conﬁrmation

Please perform all zeroing, turn off a vacuum and remove the component on the

head.

011a01 Nozzle stocker lower limit conﬁrmation

Perform All zeroing.

1b01 NL axis zero conﬁrmation

Perform All zeroing.

011c01 Nozzle arrangement conﬁrmation (rear)

The nozzle arrangement of the Current Program and the head (back) is different.

011d01 Nozzle arrangement conﬁrmation (front)

The nozzle arrangement of the Current Program and the head (front) is different.

011e01 Feeder reload (rear)

Please reload the feeder that has shortage of comp.

1f01 Feeder reload (front)

Please reload the feeder that has shortage of comp.

0606-005

2.2 List of Warning Messages

2-8

AJQEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

012001 Recycling Conveyor (rear)

Recycling conveyor (back) is ﬁlled.

012101 Recycling Conveyor (front)

Recycling conveyor (front) is ﬁlled.

012201 Recycling Conveyor (rear)

Comp. Trash Box (rear) is ﬁlled.

012301 Recycling Conveyor (front)

Comp. T

rash Box (front) is ﬁlled.

012501 Data check

Error was found in internal data of the control. Please change the model or try to

save the system data.

012601 Recycling Conveyor (rear)

Please connect the recycling conveyor (rear).

012701

Recycling Conveyor (front)

Please connect the recycling conveyor (front).

012801 T

ray safety door (rear)

Please close tray safety door and push tray ready sw(rear).

012901 Tray safety door (front)

Please close tray safety door and push tray ready sw(front).

012a01 Tray shortage Comp (rear)

Please supply comp, close tray door(rear) and push tray ready sw(rear).

012b01 Tray shortage Comp (front)

Please supply comp, close tray safety door and push tray ready sw(front).

012c01 PCB Size X

Please check the PCB size X of pattern program data.

012d01 PCB Size Y

Please check the PCB size

Y of pattern program data.

012e01 Magazine existence,

Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

012f01 Magazine existence,

Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

0606-005

2.2 List of Warning Messages