YC8_Ope_E.pdf - 第43页
1-8 1 Part names and functions 3.3 Nozzle station (option) T he nozzle station accommodates various nozzles for automatic change. T he drawings below sho w the nozzle station No. and the allotted head No. and mating nozz…
1-7
1
Part names and functions
3.2 Nozzle types
To ensure stable component pickup, the correct nozzle that matches the component must be used. The
following sections explain typical nozzles which can be attached to each head.
n
Standard nozzle and option nozzles
The standard nozzle for the YC8 is Type 63A and Type 65A.
n
NOTE
Type 64A nozzles can be selected as options. When an optional nozzle station is used, adapters are required to
accommodate Type 64A nozzles in the nozzle station.
Nozzle type Head No. Typical Components
Type 63A
(standard)
1, 2
4532 to 7343 size components, SOP 10mm to 20mm, 5mm to
16mm sq. QFP, etc.
Type 65A
(standard)
1, 2 16mm to 54mm sq. QFP and BGA, long connector, etc.
Type 64A
(option)
1, 2 SOP 30mm, 15mm to 30mm sq. QFP and BGA, etc.
c
machines.
1-8
1
Part names and functions
3.3 Nozzle station (option)
The nozzle station accommodates various nozzles for automatic change.
The drawings below show the nozzle station No. and the allotted head No. and mating nozzle type.
Nozzle station
Adapter
Machine rear side
Machine front side
Nozzle station No.
Option nozzle
(63A, 64A)
Custom nozzle
1
7
2
8
3
9
10
4
11
5
12
6
23106-N8-00
n
Nozzle station No. and allotted head
Nozzle station No.
V1 head unit
(single head)
V2 head unit
(dual head)
Nozzle Note
1 Head 1 Head 1
Custom nozzle
Type 63A and Type 64A
nozzles can also be
accommodated by using an
adapter.
2 Head 1 Head 1
3 Head 1 Head 2
4 Head 1 Head 1
5 Head 1 Head 1
Type 65A
6 Head 1 Head 2
7 Head 1 Head 1
Custom nozzle
8 Head 1 Head 1
9 Head 1 Head 2
10 Head 1 Head 1
11 Head 1 Head 1
12 Head 1 Head 2
1-9
1
Part names and functions
4. Component supply section
The feeder setup section is equipped with feeder plates for installing feeders such as tape feeders, and
power supply connectors and air connectors for driving optional units. An auto tray changer (ATS15) can
also be installed on the rear of the YC8 as an option.
4.1 Supplying components from feeder plates
Tape feeders and stick feeders are installed on two 14-feeder plates, and operate by electric power supplied
from the mounter.
YC8 feeder setup section
Two fixed 14-feeder plates
Safety cover
Air connector
Power supply connector
Power supply connector (for dump station)
14-feeder plate
23107-N8-00
Power supply connector
When using optional units such as stick feeders, plug the power cord into these connectors. The connectors labeled
"DUMP" are only for dump stations.
Air connector
Use these air connectors when using an optional device such as an air blow gun. Connect the air tube (outer diameter
4mm) to supply compressed air to the optional device from the mounter.
n
Head No. and feeder set No.
Some feeders cannot be reached by a head depending on the head assembly configuration and X-axis movement range.
The tables below show feeder set numbers that can be accessed by each head of the machine.
Type Layout Head No. Accessible feeder set No.
Number of feeders than can be
attached
Two fixed
14-feeder
plates
1
14
15
28
1 1 to 19
28 when 8mm feeders are used
2 8 to 28
n
NOTE
Accessible feeder positions may differ from the above when the Feeder Definition parameter in component
information is set to "Teach" or "Relative".