7-9-6-p1293-1295-G46_en.pdf
RoHS Note 1) When mounting a pressure gauge, use caution not to tighten excessively. Excessive tightening will cause product failure. Use a pipe tape for sealing. Note 2) When manufacturing pressure gauge, SMC uses cauti…
RoHS
Note 1) When mounting a pressure gauge, use caution not to tighten excessively. Excessive tightening will
cause product failure. Use a pipe tape for sealing.
Note 2) When manufacturing pressure gauge, SMC uses caution not to allow water to remain in the wetted
parts.
Note 3) Movable parts (gear, etc) inside pressure gauge are made of brass.
Note 4) Excludes corrosive fluids. Be sure to avoid freezing as this may cause a malfunction.
Also, if using water as the fluid, make sure that water hammer is not being applied.
Note 5) The guaranteed temperature range is 23°C ±5°C.
G46-10-02-SRA,B
Model (Standard)
Model
Connection
thread
Note
—
MPa
0 to 0.2
0 to 0.4
0 to 0.7
0 to 1.0
G46-2-01 to 02-SRA
G46-2-01 to 02-SRB
G46-4-01 to 02-SRA
G46-4-01 to 02-SRB
G46-7-02-SRA
G46-7-02-SRB
G46-10-02-SRA
G46-10-02-SRB
Pressure range
(1)
Indication
unit
MPa
R
1
4
R
1
8
R
1
4
• Be sure to read the precautions on page
1299 for selection and mounting.
Standard Specifications
Type
Port size
(1)
Fluid
(4)
Model
Indication precision
(5)
Material
(3)
Packaging
Part no.: 1305104-6A
Part no.: 1305104-12A
C
C
2
Attachment:
cover ring
assembly
Case
Clear cover
(Surface treatment)
Stud
G46--SRA G46--SRB
Back side thread
Oil/Water free
Oil/Water-free
(2)
R , R
Air, Water Air, Water
±3% F.S. (Full span)
Fluid contact part cleaning (Wetted part)
Assembly/environment
Precision cleaning General degreasing
Weight (kg)
0.085 0.085
Clean room M5.5
(Class 10000)
•
Polyethylene cap for stud parts.
• Polyethylene bag
•
Polyethylene cap for stud parts.
• Airtight polyethylene bag
General production line
Stainless steel 304 (Black melamine painted)
Bourdon tube
Stainless steel 316
Stainless steel 316
Polycarbonate (Hard coated) Part no.: G46-00-00-2
1
8
1
4
Note 1) Do not apply pressure more than the maximum display pressure. This will cause a malfunction.
Model (Made to Order)
MPa, psi
Model
Connection
thread
Note
MPa
0 to 1.0
psi
0 to 150
G46-P10-01 to 02-SRB-X30
(2)
Pressure range
(1)
Indication
unit
—
R ,
Note 1) Do not apply pressure more than the maximum display pressure. This will cause a malfunction.
Note 2) Under the New Measurement Law, products for overseas use only (SI unit type for use in Japan)
Other versions of this unit can be made on a Made-to-Order basis.
Please consult with SMC for details, as delivery times may be extended.
Pressure Gauge for Clean Regulator/
With Limit Indicator
G46-SRA/B
Series
1
8
1
4
Symbol
1293
A
How to Order
1046
q w e r t y
+
+
+
+
+
+
Symbol
2
4
7
10
P2
(1)
P10
(1)
Max. display pressure
G46
(2)
(2)
q
01
02
Connection thread
w
Description
0.2 MPa
0.4 MPa
0.7 MPa
1.0 MPa
0.2 MPa, 30 psi
1.0 MPa, 150 psi
R 1/8
R 1/4
—
With M5 (Female thread)
Nil
M
(3)
Option
e
Without cover ring assembly
Clear cover has no protrusion.
(Clear cover is irremovable.)
Nil
C
Clear cover has protrusion.
(Clear cover is removable.)
The wrench flats protrude.
C2
Attachment
t
—
Both MPa and psi
Nil
X30
Special specification
(2)
y
Component parts: Precision cleaning
Assembly: Clean room M5.5
(Class 10000)
Component parts: General degreasing
Assembly: General production line
SRA
SRB
Grade
r
Note 1) This symbol must be used with Special specification “X30.”
Note 2) Under the New Measurement Law, products for overseas use only (SI unit type for use in
Japan)
Note 3) To use the pressure gauge with M5 (female thread), attach the joint when piping the tube.
For combinations with the special specification products, please consult SMC separately.
G 01 SRA
Pressure gauge
G46-SRA/B
1294
44.5 (46.5)
26.5
14
ø42.5
[M5 x 0.8 x 5
Option: For M]
R 1/8 (R 1/4)
44.5 (46.5)
≈1 3.3
ø57
ø53
48.5
R 3
26
44.5 (46.5)
3.3≈6
ø53
ø57
M48 x 2
R1/8 (R1/4)
[M5 x 0.8 x 5
Option: For M]
G46--01 to 02 (M)-SRA/SRB
G46--01 to 02 (M)-SRA/SRB-C
Type C (Clear cover is not removable.)
G46--01 to 02 (M)-SRA/SRB-C2
Type C2
(Clear cover is removable. The wrench flats protrude.)
Panel fitting dimensions
Plate thickness Max. 3.5 t
With cover ring assembly (For panel mount)
Dimensions
∗ The dimensions in ( ): Connection thread R 1/4
G46-SRA/B
Pressure Gauge for Clean Regulator/
With Limit Indicator
[M5 x 0.8 x 5
Option: For M]
M48 x 2 R 1/8 (R 1/4)
1295