00197501-02_AI_WPC_Umbau_X-Series_S_DE_EN.pdf - 第63页

Review 2 Brief description 2.1 Overview of SIPLACE WPC5/WPC6 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X Series S 03/2020 63 2 Brief description A SIPLACE WPC5/WPC6 …

Review

1 Introduction

1.4 Abbreviations

62 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020

Review

2 Brief description

2.1 Overview of SIPLACE WPC5/WPC6

Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020

2 Brief description

A SIPLACE WPC5/WPC6 can be operated at location 2 of the SIPLACE X-Series S.

The following is required:

●

A fixed table for SIPLACE WPC must be fitted.

●

The waste slide must be changed.

●

The cover must be converted.

●

A protective cover must be fitted to the SIPLACE WPC5/WPC6.

●

Calibration runs need to be performed in the station software.

2.1 Overview of SIPLACE WPC5/WPC6

Fig.6: Overview of SIPLACE WPC5/WPC6

1. SIPLACE X-Series S

2. SIPLACE WPC5/WPC6

3. Non-Stop Module (only for SIPLACE

WPC6)

NOTICE

Location

A SIPLACE WPC5/WPC6 can only be operated at location 2 of the SIPLACE X-Series S.

Review

2 Brief description

2.2 Overview of SIPLACE WPC5/WPC6 insert

64 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020

2.1.1 Overview of the Modules

Fig.7: Overview of the modules

1. Protective door

2. Non-Stop Module (only for SIPLACE

WPC6)

3. EMERGENCY STOP button

4. Main switch

5. Protective covers on the power supply

6. Crank handle for lifting or lowering the

trolley carriage

7. Protective covers on the lifting mechan-

ism (tower)

8. Feed axis with waffle pack tray carrier

9. Cover over the feed axis drive

2.2 Overview of SIPLACE WPC5/WPC6 insert

Fig.8: SIPLACE WPC5/WPC6 insert

1. Insertion area for the SIPLACE WPC5/

WPC6

2. Insertion area for the fixed table with

10free tracks

3. Installation position for nozzle changer

4. Feeder control unit