00197501-02_AI_WPC_Umbau_X-Series_S_DE_EN.pdf - 第70页
Review 3 Setting up and Commissioning 3.2 Installing the Manual Table 70 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X Series S 03/2020 3.2 Installing the Manual Table…
Review
3 Setting up and Commissioning
3.1 Removing the Standard Component Trolley Feed Device
Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
69
1
1
3
2
Fig.12: Assembly lifting device and mounting tool
1. Fixtures
2. Mounting tool
3. Eyelet
► Attach the mounting tool (2) to the fix-
tures provided (1)
on the COT insert.
► Fix the lifting device to the eyelet (3) of
the mounting tool (2)
.
NOTICE!
The COT insert can be installed at dif-
ferent positions in the machine loca-
tion. Mark the position of your COT in-
sert, to ensure that this is sub-
sequently returned to its original posi-
tion.
.
1
1
1
1
2
1
Fig.13: Lifting out the COT insert
► Loosen the screws fastening the COT
insert(1)
.
► Lift the complete COT insert out of the
machine and place it on a suitable sur-
face (four wooden blocks etc.).
► Make sure that you do not damage any
valves, connection cables, hoses etc.
Review
3 Setting up and Commissioning
3.2 Installing the Manual Table
70 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
3.2 Installing the Manual Table
NOTICE
Cables and hoses
► Before installing the table ensure to route all cables and hoses for the subsequent
connection.
Fig.14: Manual table
1. Free tracks for tape reel container
assembly /WPC [03060460-xx]
2. Insertion for the SIPLACE WPC5/
WPC6
3. FCU
4. Waste slide, welded WPC / JTF
[03111440-xx]
► Before installing the fixed table, the waste slide must be removed. See also the chapter 3.5
"Fitting the Waste Tape Slide" [}77].
Fig.15: Installation position 3
The fixed table for the SIPLACE WPC5/
WPC6 is fitted to the outermost position of
the SIPLACE X-Series S.
1. Installation position 3
Review
3 Setting up and Commissioning
3.2 Installing the Manual Table
Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
71
Fig.16: Heavy table for SIPLACE WPC5/WPC6
CAUTION!
Heavy machine part!
You might need to enlist the help of a
second person to prevent this.
.
► Lift the fixed table for the SIPLACE
WPC5/WPC6 (1)
into place.
► Pull the table forwards to position 3.
Fig.17: Fixing the fixed table into place
► Fix the fixed table for the SIPLACE
WPC5/WPC6 into place at position 3 in
the machine (1)
, with four screws
M8x20 [03042575-xx].
WARNING
Unstable frame
Dismantling the front section of the manual table can make the frame unstable.
► Do not dismantle the front section of the manual table.