167152 Issue 2 - Maintenance Manual.pdf - 第9页
PREVENTIVE MAINTENANCE MACHINE INFORMATION Chapter Issue 2, July 16 Maintenance Manual 1.1 CHAPTER 1 PREVEN TIVE MAINTENANCE MACHINE INFORMA TION The maintenance engineer should complete the following in formation boxes …
Maintenance Manual
CUSTOMER USE Date
Originator Name & Department
Position
Company
Telephone
Fax
Email
Machine Model Number
Software Version
Serial Number
Manual Title
Chapter
Chapter / Figure
Details of Change
Attachments
INTERNAL USE No.
Accepted No Reason
Yes Priority Immediate
Next Release
Details of Change
Manuals Affected Name
Date Signature
PREVENTIVE MAINTENANCE
MACHINE INFORMATION
Chapter Issue 2, July 16 Maintenance Manual 1.1
CHAPTER 1 PREVENTIVE MAINTENANCE
MACHINE INFORMATION
The maintenance engineer should complete the following information boxes as
a permanent record of the machine details.
Monthly Maintenance Completed
In the Monthly Maintenance section of this manual (Maintenance Procedure for
Month 1 to 12), each task is ticked when complete. At the end of the section is
a space for Summary/Remarks, this can be used for any observations or
potential problems that may occur in the future (e.g. slight wear on print carriage
belt - new one on order).
If any comments were entered in the Summary/Remarks box in the monthly
maintenance section, enter ‘Yes’ in the last column of the table above. This
indicates to the next engineer (on the following month) of any issues that the
engineer needs to be aware of. In the example above, the engineer can check
that the new belt has been fitted.
Machine Serial Number
Line Number
Customer
Month Engineers Name Signed Date Summary/Remarks
(Yes/No)
1
2
3
4
5
6
7
8
9
10
11
12
PREVENTIVE MAINTENANCE
INTRODUCTION
1.2 Maintenance Manual Chapter Issue 2, July 16
INTRODUCTION
Safety The following safety notices are used in this manual:
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING IN
THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS ON THE
FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING SOLUTIONS MAY
CONTAIN SUBSTANCES HAZARDOUS TO HEALTH. WHEN USING CLEANING
WIPES AND CLEANING SOLUTIONS THE MANUFACTURERS’ SAFETY DATA
SHEETS MUST BE STRICTLY ADHERED TO.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
The machine must be powered down, the isolator switch locked and the
pneumatics disconnected during maintenance procedures such as inspection/
checking, cleaning and lubricating.
Where the procedure requires the machine to be powered (e.g. dimension,
calibration, setting or a belt tension check), the procedure must be carried out
as stated in the relevant chapter of the Technical Reference manual to ensure
safe working practices.
Material Safety
Data Sheets
Material Safety Data Sheets (MSDS) listing the health and safety aspects
applicable to consumables such as cleaning materials, oils and greases are
available on request from the purchase source.
If difficulty is experienced in obtaining any MSDS, assistance is available from
ASM. Contact your local ASM agent.
Philosophy Recommended Preventive Maintenance (PM) is to be performed monthly as
defined in the programme.
There is a daily maintenance program for the machine operator which must be
completed before the monthly maintenance is started.
If any items or parts are found to be defective, please contact your local ASM
agent.
The PM must be adhered to in the order that it has been presented.