ESE E, H printer - 2024.pdf - 第11页

ES-E & H Table 4 Ball screws with High precision, High stiffness and additional 3 shafts Servo Control for Table axis – X, Y and Theta – and Z1 & Z2 Equal printing pressure break up to guarantee high accurate pri…

1] Servo Control Table – X, Y & Theta axis and Table Z1 & Z2

2] Servo Control Squeegee Y axis with Precise Ball screw

3] Servo Control Camera X & Y axis

4] Automatic Width adjustment 3 stages conveyors

5] Easy to change Mask stencil with Plunger

6] Wet, Dry, Vacuum Cleaning with Solvent Tank (4 liter)

7] Industrial PC with UPS

8] High stiffness frame

Basic Structure

ES-E & H Table

4 Ball screws with High precision, High stiffness and

additional 3 shafts

Servo Control for Table axis – X, Y and Theta – and Z1 & Z2

Equal printing pressure break up to guarantee high

accurate printing quality and long run use without a trouble

PATENT for Theta Axis precise adjustment

ESE printer table structure can break up a printing pressure

equally unlike other printers.

This mechanism can guarantee the machine table durability

and can save Table calibration cost for long using.

Table each axis (X.Y.Theta) accuracy can be measured

anytime from embedded program

Z (Top) clamp by a precise ball screw driven guides a stable PCB loading and much perfect PCB clamping.

Optional Y (side) clamp and its pressure control guarantees a perfect PCB surface level to Stencil and manage each product effectively

Center vacuum unit is for individual support plate (JIG or nest) for very thin PCB (less than 0.5mm or 0.3mm) and whenever Users can put a vacuum plate onto the table

For much high throughput, all ESE printer has 3 stage conveyor system and an embedded shuttle on output convey can be applied for Back-to-Back printer

ES-E & H Clamp. 3 Stage conveyor

Clamp system by precise ball screw

Perfect clamping - Standard

Perfect clamping - Optional

3 stage conveyor for high throughput - Standard