ESE E, H printer - 2024.pdf - 第37页
Paperless Cleaner kit AHORRO (Hybrid) cleaning system Ionizer Cleaning system for PCB OPTION Cleaning capability _ 1005mm. 0.4 Pitch (recommended) Capability size _ 350mm and 500mm (*500mm paperless cleaner kit will be r…
Enclosed Print Head Squeegee
Easy Clip (one-touch) Squeegee
OPTION
Special print head squeegee system for Packaging printing solution
Recommended to use after recharging 1000~1500g Solder
Keep same solder viscosity continuously with Automatic solder mixing &
rolling system
Automatic Solder rechargeable system
Note :
This kit should be keeping in storage box ( temperature 4
℃
+ max 7 days )
In case out of this standard, Please use after Whole kit cleaning and Solder
recharge
Easy Clip Squeegee
No need to assemble by screw
Saving squeegee change time
Paperless Cleaner kit
AHORRO (Hybrid) cleaning system
Ionizer Cleaning system for PCB
OPTION
Cleaning capability _ 1005mm. 0.4 Pitch (recommended)
Capability size _ 350mm and 500mm
(*500mm paperless cleaner kit will be reconfirmed in 2019)
Mask stencil Thickness- 0.1mm over
Replacement cycle _ every 6 month
Cleaning cycle _ every 4 or 8 hours per production
cleaning
*During Paperless cleaner kit cleaning,
Mask stencil cleaning needs to keep much perfect
condition for production
Blade only replacement available
No paper for cleaning, No IPA liquid No Solvent tank
No need a space, extra cost for paper stock
Easy detachable structure for time saving
AHORRO (Hybrid) Cleaning system Ionizer Cleaning system for PCB
(Anti-Static)
This system can be located at Input
conveyor upper side in order to
clean PCB surface before loading
for printing
ESE new innovative cleaning system ( Hybrid cleaning
system ) allow you to select one of 3 cleaning modes
depends on your production or production
managing situation
- Standard cleaning mode
- Eco cleaning mode (paperless cleaning)
- Wipe roll paper saving 30-45% against standard
paper cleaning system
- Paperless kit can be detachable
3D printing solution
RFID management
OPTION
Reference printing for 3D (stepped, notched) printing of lead
frame
To give a perfect printing solution of 3D stencil printing, ESE needs
a customer printing process and its detailed specification
RFID management
ESE printer can read PCB barcode (size less than 5mm) by camera OR can
supply Barcode management system with software as option
Additionally, ESE can apply RFID reading option as per customer details
ESE needs to get customer RFID information in detail to make the optional
reading system