IPC-A-610D Chinese.pdf - 第404页

ASSOCIA TION CONNECTING ELECTRONICS INDUSTRIES 3000 Lakeside Drive, Suite 309S, Bannockburn, IL 60015-1219 T el. 847.615.7100 Fax 847.615.7105 www .ipc.org ® ISBN #1-580987-85-0

ANSI/IPC-T-50 互联电子线路封装产品

条款及

定义

申

报

表

此表格将同步于企业和行业中例行的规定.

欢迎个体或单位参与发表意见。请填写此

份表格并反馈给:

IPC

3000 Lakeside Drive, Suite 309S

Bannockburn, IL 60015-1219

传真: 847 615.7105

申请人信息:

姓名:

公司名称:

所在城市:

所属国家:

电话号码:

日期:

❑ 新的条款及定义的申报.

❑ 对原有条款及定义的补充.

❑ 对原有条款及定义的修改.

条款定义

如空间不足,请写在背面或附页上.

文件: ❑ 不适用 ❑ 要求的 ❑ 待定

❑ 包括: 电子稿名称:

适用此条款及定义的文件:

与此条款及定义相关的委员会:

由IPC 内部填写

IPC Office Committee 2-30

Date Received: Date of Initial Review:

Comments Collated: Comment Resolution:

Returned for Action: Committee Action:

Revision Inclusion: ❑ Accepted ❑ Rejected ❑ Accept Modify

IEC Classiﬁcation

Classiﬁcation Code • Serial Number

Terms and Deﬁnition Committee Final Approval Authorization:

Committee 2-30 has approved the above term for release in the next revision.

Name: Committee: IPC 2-30

Date:

Free demos of these and other training aids are available at http://training.ipc.org

For ordering and pricing information, contact IPC at:

Phone: 847-597-2862 Fax: 847-615-7114 Web: www.ipc.org/onlinestore E-Mail: orderipc@ipc.org

More Acceptability

RESOURCES

IPC-DRM-SMT

Surface Mount Solder

Joint Evaluation -

Training and Reference Guide

This desk reference manual will

help your workforce understand

and apply the surface mount

acceptance criteria from IPC-

A-610 and J-STD-001. IPC-DRM-

SMT contains color graphics for

chip component, gull wing and

J-Lead solder joints. Quantity dis-

counts are available.

IPC-A-610D Illustrations on CD-ROM

IPC is offering IPC-A-610D illustrations

electronically in a fully editable TIF format

for individual purchase. The TIF files are the

same size as they appear in the hard copy

and the size can be adjusted. All TIF files

are high resolution and full-color.

Your purchase of these graphics gives

you unlimited rights to use these illus-

trations for internal corporate use.

Permission is not granted for resale

or transfer to other corporations.

IPC-DRM-40

Through-Hole Solder

Joint Evaluation – Training

and Reference Guide

Through-hole assembly in-

spectors now have an easy-to-

use desk reference manual that

contains computer generated

3D graphics of the soldering

requirements of J-STD-001 and

the additional soldering work-

manship standards contained

in IPC-A-610. Clear, conclusive

photographs are provided for

target conditions, minimum

acceptable conditions, non-conforming process indicators and

non-conforming defects in a simple to understand format. A termi-

nology section is included for easy reference. Quantity discounts

are available.

A SSOCIAT I ON CON N E C T I NG�

E L E C T R O N IC S I N D U S T R IE S

®�

Surface Mount and PTH Solder Joint Evaluation Wall Posters

Based on the IPC-A-610 and J-STD-001, these SMT and PTH Solder

Joint Evaluation Posters graphically illustrate the minimum acceptability

requirements for Class 2 and Class 3 solder joints. SMT includes (3)

separate posters for Chip Component, J-Lead and Gull Wing -- for each

class. One PTH poster covers either Class 2 or Class 3. All posters are

20x28 inches, laminated with eyelets for wall hanging. Bring technically

accurate, industry consensus acceptability standards to your training

room or inspection areas.

P-SMTL-2 PTHL-2

Set of (3) SMT posters for each component type – Class 2. (1) poster for PTH acceptability – Class 2.

P-SMTL-3 PTHL-3

Set of (3) SMT posters for each component type – Class 3. (1) poster for PTH acceptability – Class 3.

ASSOCIATION CONNECTING

ELECTRONICS INDUSTRIES

3000 Lakeside Drive, Suite 309S, Bannockburn, IL 60015-1219

Tel. 847.615.7100 Fax 847.615.7105

www.ipc.org

ISBN #1-580987-85-0