00191663.pdf - 第21页
Retrofit Instructions 80F5 DCA Option 05/99 issue 4 Safety instructions 21 4 Safety instructions W A RNING This retr ofit mus t be car ried out by SIEME NS engine ers. 4 È Al ways follo w the ac cident pr eventio n regul…
DCA Option Retrofit Instructions 80F5
05/99 issue
20
(9) Battery
(10) Power supply unit
2 Technical data for the component vision system
for flip-chips, bare dies and standard components
on the 6-nozzle revolver head (DCA option)
Camera type: SONY XC75CE 2
Number of pixels: 570 x 570 2
Field of vision: 15.7mm x 15.7 mm 2
Illumination method: Front lighting (red light), 4 LED planes (even, flat,
medium, steep) 2
Image processing: HALE grey scale method (H
igh Accuracy Lead Extraction) 2
Monitor: RGB (VGA mode) 640 x 484 pixels 2
Component size: 0.25 mm x 0.5 mm ... 13 mm x 13 mm 2
Range of components
that can be detected: Flip-chips, bare dies, components up to 13mm x 13mm 2
Minimum lead spacing 0.2 mm 2
Minimum ball diameter: 110
µm 2
System sensor type (SST) 14 2
3 Line and station computer requirements
Line computer software ≥ 5.01
Station computer software
≥ 4.05
MC software
≥ 4.05
CAN firmware 2.2
SITEST
≥ 4.05
Nozzle types 750 - 759 3
Retrofit Instructions 80F5 DCA Option
05/99 issue 4 Safety instructions
21
4 Safety instructions
WARNING
This retrofit must be carried out by SIEMENS engineers. 4
È Always follow the accident prevention regulations applicable in your country, e.g. EN 60204.
È End all operations on the placement system.
È Shut down the Windows NT operating system correctly, otherwise you may experience prob-
lems when restarting the placement system or you could loose data.
È Switch the placement system off at the main switch.
È Disconnect the placement system from the power supply.
È Secure the placement system to prevent reclosing and put up a sign to indicate that servicing
work is in progress (see chapter 2 Operational Safety of the User Manual).
È Open the protective covers and move the main gantry into a comfortable working position.
WARNING
To avoid damaging the revolver head, ALWAYS observe the following points when moving the
gantry: 4
– NEVER move the gantry by pushing with your hands against the revolver head.
– NEVER move the gantry by pushing against or pulling the recessed grip of the revolver head.
The revolver head may lose its settings or be damaged on account of the high braking force of
the y gantry drive.
– NEVER push the gantry while the z axis is lowered.
– Take hold of the cast iron part of the x axis and then move the gantry.
DCA Option Retrofit Instructions 80F5
05/99 issue
22
5 Tools and equipment
– Set of Allen keys, DIN 911
– SITEST program, version 4.05 or higher
6Parts
DCA package for SIPLACE F5 6-segment revolver head, item no. 00117130-02, consisting of: 6
– 16 x 16 FC camera, item no. 00337450-01
– Complete cover for flip-chip camera, item no. 00337697-02
– MVS 340 VME F5 DCA V2144E, item no. 00341201-03
– EXPANDO PT 30-0 flexible tubing, item no. 00344962-01
– SP6/12 digital control cable with FC camera, item no. 00337804-01
– SIPLACE 80F5 DCA service box, item no. 00341616-01
7 Dismantling the cover
È Switch off the placement system and secure to prevent reclosing as described in section 4.
È Remove the five M3x5 hexagon socket-head screws for fixing the cover (see Fig. 7 - 1, point A)
È Pull the cover towards you slightly in the horizontal direction (see Fig. 7 - 1, point B).
È Lift up the cover to remove (see Fig. 7 - 1, point C).