00195377-0102.pdf - 第20页
Retrofit instructions: Flexible dual conveyo r, SIPLACE D4 04/2007 Edition 20 2.3 Safety instructions W ARNIN G The safety instructions from the "Operational safe ty" chapter of the user manu al and servicing i…
Retrofit instructions: Flexible dual conveyor, SIPLACE D4
04/2007 Edition
19
2 Retrofit instructions
Flexible dual conveyor
SIPLACE D4
2.1 Restrictions
The flexible dual conveyor can be used from SIPLACE Pro 4.0 and station software 603. 2
2.2 Parts required
2.2.1 Retrofit kit: Flexible dual conveyor, SIPLACE (item no.: 03054644-xx)
2
Name 2 Item number 2 Quantity 2
Hexagonal shaft, size 8 x 480 2 03052474- 2 10 x 2
Hexagonal shaft guide 2 00369711- 2 10 x 2
DIN 6799 - 5-ST 2 00048327- 2 10 x 2
DIN 9021 - 6.4 - 140 HV - ST 2 00048337- 2 20 x 2
Spacer for hexagonal shaft, HS60/D4 2 03053130- 2 4 x 2
DIN 125-A 4.3-140HV-A2 2 00316894- 2 36 x 2
DIN 6912-M4 x 14-A2-70 2 03046118- 2 20 x 2
DIN 6912-M4 x 18-A2-70 2 03046119- 2 8 x 2
DIN 934 - M 4 - A2-70 2 03045297- 2 8 x 2
Retrofit instructions: Flexible dual conveyor, SIPLACE D4
04/2007 Edition
20
2.3 Safety instructions
WARNING
The safety instructions from the "Operational safety" chapter of the user manual and servicing in-
structions take precedence over these instructions. 2
The SIPLACE placement machines are supplied with main power voltage.
Consequently parts of these systems carry dangerous voltages! This voltage is present at certain
modules inside the machine base, even when the machine is switched off at the main power
switch.
Incorrect handling of the placement machine or touching live parts of the machine can result in
death or severe injury, and considerable damage to equipment.
BEFORE starting any work, shut down the operating system correctly, then switch the machine
OFF at the main power switch and disconnect from the main power supply. In addition, the com-
pressed air supply must be switched off at the compressed air unit's main valve in the machine
base and vented by actuating the needle valve on the compressed air unit.
There is DANGER for heart pacemaker wearers in the vicinity of the linear motors, as described
in detail in the "Special safety instructions for working in the vicinity of strong magnetic fields"
section of the user manual and service manual.
Always follow the accident prevention regulations, DIN or other standards and special safety
rules applicable in your country.
Pay attention to the information concerning residual voltages in the Operational Safety chapter.
Follow the ESD regulations as described in the operational safety section of the operating
instructions.
During the retrofit, always secure the machine to prevent access by other people and to prevent
it being switched on again. The procedure is described in the "Lock out and tag out procedure"
section of the user manual.
Working with the SITEST program further increases the risk of accident.
The SITEST program must only be used by authorized and trained personnel.
2
2
Retrofit instructions: Flexible dual conveyor, SIPLACE D4
04/2007 Edition
21
2.3.1 Definitions
2
Please note 2
2
2
2
Caution 2
2
2
2.3.2 Tools and consumables required
– 1 set of metal drill bits (4.0 mm)
– Power drill
– Conveyor fixed side panel, setup gauge, DC/SC HS60/D4 (item no.: 03054247-xx)
– Dual conveyor, fixed panel distance jig, DC HS60/D4 (item no.: 03054248-xx)
– Flex conveyor drilling template, HS-60/D4 (item no.: 03053716-xx)
– 10 x Circlip, DIN 6799 - 5-ST (00048327-xx).
2
2
2