00192792-02.pdf - 第58页
2 Retrofitting Instructions: M atrix Tray Changer MTC on S-25 HM (Option) SIPLACE 80 S-25 HM 2.5 Retrofit Kit, Tools and Docume nts 01/01 Issue 58 - 1 T r ack sc ale for sho rt empty -tape duct 00308062- 01 plac ed on tr…
SIPLACE 80 S-25 HM 2 Retrofitting Instructions: Matrix Tray Changer MTC on S-25 HM (Option)
01/01 Issue 2.5 Retrofit Kit, Tools and Documents
57
5HWURILW.LW7RROVDQG'RFXPHQWV
&RPSRQHQWV RIWKH07&UHWURILWNLW,WHPQR
8QLWV 'HVLJQDWLRQ ,WHPQR 5HPDUNV
- 1 Holder for empty-tape duct S25 00354143-01
- 1 Holder assembly
for nozzle changer S25 (MTC) 00357127-01
- 3 Socket hex head cap screws M5 x 20 00095131-01 To fasten the holder
for nozzle changer MTC
- 1 Component reject box, table 00355146-01 *)
- 1 Dust (protection) cover
SIPLACE S25HM 00356051-01
- 1 Clamping sheet metal, left 00343721-01
- 1 Clamping sheet metal, right 00357808-01
- 1 "Rail, component table" 00334697-03
- 1 Safety pane (Eslon) with barcode
swivel doors (narrow safety door, right) 00354956-01
- 1 Retrofitting Instructions MTC on S-25 HM 001927992-01 (G + E)
*) required on machines WITHOUT opening for MTC: serial numbers up to about 449
2SWLRQVUHTXLUHGIRU86$-DSDQ
- Retrofit kit for USA:
110V~ Voltage Module MTC 00116437-01
incl. Retrofitting Instructions (G + E) 00193119-01
- For Japan: External power supply MTC 00118090-01
$GGLWLRQDOPRGXOHVUHTXLUHG
- 1 MTC assembly, incl. connection cable 00116436-01 / -02
included:
– 1 Component reject box MTC 00355074-01
(required for machines with WITH
opening for MTC in the frame: serial number 450 and later
– 1Empty-tape duct assembly (= short)
- Depending on requirements:
1 nozzle changer S-25HM (MTC)
for 6-segment revolver head or 00118262-01
1 nozzle changer S-25HM (MTC)
for 12-segment revolver head 00118261-01
2 Retrofitting Instructions: Matrix Tray Changer MTC on S-25 HM (Option) SIPLACE 80 S-25 HM
2.5 Retrofit Kit, Tools and Documents 01/01 Issue
58
- 1 Track scale for short empty-tape duct 00308062-01 placed on track scale
$GGLWLRQDO0DWHULDODQG([SHQGDEOHV
- 2 if needed, cable ties (W = 2.4 mm, L = 92 mm) 0805140-01 per nozzle changer MTC
- 1 Mounting pedestal for cable ties,
self-adhesive 00318666-01 per nozzle changer MTC
- 2 Cable ties (W = 2.4 mm, L = 92 mm) 00805140-01
- 1 (if needed) adhesive label, (with text) 00332920-03 German + English
- 1 (if needed) adhesive label (with text) upon request EU languages
- 1 (if needed) adhesive label: triangular
Warning symbol, "Hand injury" 00335957-01
- Wide insulating tape/adhesive tape
- Screw-locking compound, Loctite no. 243 00334892-01
- Screw-locking compound RED
- Ethyl alcohol and clean cloth
5HTXLUHG7RROVDQG$X[LOLDU\7HVW(TXLSPHQW
– Set of Allen wrenches
– Fork wrenches width across the flats 10, 13 and 30-36
5HTXLUHGGRFXPHQWV
- User Manual for SITEST program,
software version 502.xx, German 00191331-02
- Software version description LRU 502.01 (G + E) 00192397-01
– User Manual MTC, SW Version 502.xx,
German, Item no. 00192317-01
English, Item no. 00192318-01
- Retrofitting Instructions
"110V~ Voltage Module MTC (Optional)", G + E 00193119-01
SIPLACE 80 S-25 HM 2 Retrofitting Instructions: Matrix Tray Changer MTC on S-25 HM (Option)
01/01 Issue 2.6 Preparatory Steps
59
3UHSDUDWRU\ 6WHSV
WARNING
The movable blade, fixed blade and the tape deflector on the cutter pose a high risk of injury.
Never reach into the cutter from below or into the empty-tape duct from above, not even if tape is
jammed, e.g., while disconnecting the movable component changeover tables.
NOTE:
Store all of the parts removed in such a manner that they will be available again later for re-instal-
lation.
5HPRYLQJ7DSH:DVWH&KXWHDQG6SDFHU%ROWV
NOTE:
The MTC is retrofitted on S-25 HM (with 6- or 12-segment head) at location 1 AND / OR at
location 3.
Å To disconnect the movable component changeover table, turn the machine and then the com-
pressed air ON.
Å Disconnect the movable component changeover table from the machine and move it out of the
machine.
Å Turn the machine OFF and disconnect it from the mains. Turn the compressed air supply on
the compressed air unit OFF and bleed the needle valve (see DANGER text in Section 2.4).
Å Disassemble the tape waste chute (1 socket hex head cap screw M5 each left and right).