00194923-01_OIS_DB.pdf - 第22页

Schnittstellenbeschreibung OIS Datenbank Version 4.1 Interface Description OIS Database Version 4.1 22 von 47 2085 No. of pins: no result 2086 No. of pins: no result (Corner) 2087 No. of pins: no result (Lead) 2088 Colin…

OIS Datenbank Version 4.1 Schnittstellenbeschreibung

OIS Database Version 4.1 Interface Description

21 von 47

2045 Component angle outside tolerance (Lead)

2046 Component angle outside tolerance (Grid)

2047 Component angle outside tolerance (Ball)

2048 Position: evaluation not possible

2049 Position: evaluation not possible (Size)

2050 Position: evaluation not possible (Row)

2051 Position: evaluation not possible (Corner)

2052 Position: evaluation not possible (Lead)

2053 Position: evaluation not possible (Grid)

2054 Position: evaluation not possible (Ball)

2055 Dimension: evaluation not possible

2056 Dimension: evaluation not possible (Size)

2057 Dimension: evaluation not possible (Row)

2058 Dimension: evaluation not possible (Corner)

2059 Dimension: evaluation not possible (Lead)

2060 Dimension: evaluation not possible (Grid)

2061 Dimension: evaluation not possible (Ball)

2062 No. of pins: evaluation not possible

2063 No. of pins: evaluation not possible (Corner)

2064 No. of pins: evaluation not possible (Lead)

2065 Colinearity: evaluation not possible

2066 Colinearity: evaluation not possible (Corner)

2067 Colinearity: evaluation not possible (Lead)

2068 Spacing: evaluation not possible

2069 Spacing: evaluation not possible (Corner)

2070 Spacing: evaluation not possible (Lead)

2071 Position: no result

2072 Position: no result (Size)

2073 Position: no result (Row)

2074 Position: no result (Corner)

2075 Position: no result (Lead)

2076 Position: no result (Grid)

2077 Position: no result (Ball)

2078 Dimension: no result

2079 Dimension: no result (Size)

2080 Dimension: no result (Row)

2081 Dimension: no result (Corner)

2082 Dimension: no result (Lead)

2083 Dimension: no result (Grid)

2084 Dimension: no result (Ball)

Schnittstellenbeschreibung OIS Datenbank Version 4.1

Interface Description OIS Database Version 4.1

22 von 47

2085 No. of pins: no result

2086 No. of pins: no result (Corner)

2087 No. of pins: no result (Lead)

2088 Colinearity: no result

2089 Colinearity: no result (Corner)

2090 Colinearity: no result (Lead)

2091 Spacing: no result

2092 Spacing: no result (Corner)

2093 Spacing: no result (Lead)

2094 Position: component outside feed tolerance

2095 Position: component outside feed tolerance (Size)

2096 Position: component outside feed tolerance (Row)

2097 Position: component outside feed tolerance (Corner)

2098 Position: component outside feed tolerance (Lead)

2099 Position: component outside feed tolerance (Grid)

2100 Position: component outside feed tolerance (Ball)

2101 Dimension: component outside feed tolerance

2102 Dimension: component outside feed tolerance (Size)

2103 Dimension: component outside feed tolerance (Row)

2104 Dimension: component outside feed tolerance (Corner)

2105 Dimension: component outside feed tolerance (Lead)

2106 Dimension: component outside feed tolerance (Grid)

2107 Dimension: component outside feed tolerance (Ball)

2108 No. of pins: component outside feed tolerance. Sequential error

2109 No. of pins: component outside feed tolerance (Corner)

2110 No. of pins: component outside feed tolerance (Lead)

2111 Colinearity: component outside feed tolerance. Sequential error

2112 Colinearity: component outside feed tolerance (Corner)

2113 Colinearity: component outside feed tolerance (Lead)

2114 Spacing: component outside feed tolerance. Sequential error

2115 Spacing: component outside feed tolerance (Corner)

2116 Pitch: Component outside feeding tolerance (Lead)

2277 The difference between open and closed vacuum values is too small

2424 Coplanarity: Bad component, to be returned

2451 Coplanarity: Component cannot be measured (excessive offset in lead direction)

2452 RV-head: Segment not airtight after placement

2453 IC-head: Segment not airtight after placement

2454 Nozzle contaminated or worn out

2455 Vacuum value of segment too low with valve closed

2516 Warning: Nozzle is slightly soiled

OIS Datenbank Version 4.1 Schnittstellenbeschreibung

OIS Database Version 4.1 Interface Description

23 von 47

3475 Difference in vacuum too great between placement and pick-up

3513 Vision system: Flipped component detected

3553 Component not on nozzle prior to dipping

3570 Component on the nozzle before pickup pr nozzle dirty

3573 Nozzle dirty or obstruction during pickup

13005 Coplanarity module: Component faulty

15265 Cover foil on tape feeder damaged

15266 Cover foil not removed from tape feeder

17410 Warning RV head: Segment not airtight after placement

18109 Nozzle could not be identified by component sensor

18132 Warning: No component available for placement

18133 Warning: Nozzle is soiled

18134 Warning: Measured component height too large

18135 Warning: Measured component height too small

18136 Nozzle worn

18137 Track empty error detected by component sensor

18139 Nozzle soiled before pick-up

18509 Vacuum not achieved (no component on the nozzle)

18510 Vacuum not achieved (component not located securely on the nozzle)

18517 The difference between open and closed vacuum values is too small

18554 Component not at nozzle after pick-up

18555 Component not on nozzle prior to placement

18557 Nozzle not empty prior to pick-up

18558 Nozzle not empty after placement

18560 Error in feeder on pick-up

18565 Component not at nozzle after pick-up

18566 Component not at nozzle before placement

18567 Component not on nozzle during dipping

18570 Component not on nozzle prior to dipping

18916 Component cannot be picked up with the selected head type

18921 (Bauelement wird abgeholt, bevor die Abholposition erreicht wird)

19112 Component not seated on nozzle correctly on pickup

21017 Component picked up at wrong angle

21424 Component description for measurement with SIPLACE Vision incomplete

21802 Component outside feed tolerance

21803 Component rotation angle outside tolerance

21804 Measured offset in X and Y outside presentation tolerance

21805 Measured offset in X outside presentation tolerance

21806 Measured offset in Y outside presentation tolerance

21811 Position cannot be determined