00194923-01_OIS_DB.pdf - 第24页

Schnittstellenbeschreibung OIS Datenbank Version 4.1 Interface Description OIS Database Version 4.1 24 von 47 21812 Compone nt inspection failed 21813 Size check fa iled 21815 Flipped component detected 21816 Quality is …

OIS Datenbank Version 4.1 Schnittstellenbeschreibung

OIS Database Version 4.1 Interface Description

23 von 47

3475 Difference in vacuum too great between placement and pick-up

3513 Vision system: Flipped component detected

3553 Component not on nozzle prior to dipping

3570 Component on the nozzle before pickup pr nozzle dirty

3573 Nozzle dirty or obstruction during pickup

13005 Coplanarity module: Component faulty

15265 Cover foil on tape feeder damaged

15266 Cover foil not removed from tape feeder

17410 Warning RV head: Segment not airtight after placement

18109 Nozzle could not be identified by component sensor

18132 Warning: No component available for placement

18133 Warning: Nozzle is soiled

18134 Warning: Measured component height too large

18135 Warning: Measured component height too small

18136 Nozzle worn

18137 Track empty error detected by component sensor

18139 Nozzle soiled before pick-up

18509 Vacuum not achieved (no component on the nozzle)

18510 Vacuum not achieved (component not located securely on the nozzle)

18517 The difference between open and closed vacuum values is too small

18554 Component not at nozzle after pick-up

18555 Component not on nozzle prior to placement

18557 Nozzle not empty prior to pick-up

18558 Nozzle not empty after placement

18560 Error in feeder on pick-up

18565 Component not at nozzle after pick-up

18566 Component not at nozzle before placement

18567 Component not on nozzle during dipping

18570 Component not on nozzle prior to dipping

18916 Component cannot be picked up with the selected head type

18921 (Bauelement wird abgeholt, bevor die Abholposition erreicht wird)

19112 Component not seated on nozzle correctly on pickup

21017 Component picked up at wrong angle

21424 Component description for measurement with SIPLACE Vision incomplete

21802 Component outside feed tolerance

21803 Component rotation angle outside tolerance

21804 Measured offset in X and Y outside presentation tolerance

21805 Measured offset in X outside presentation tolerance

21806 Measured offset in Y outside presentation tolerance

21811 Position cannot be determined

Schnittstellenbeschreibung OIS Datenbank Version 4.1

Interface Description OIS Database Version 4.1

24 von 47

21812 Component inspection failed

21813 Size check failed

21815 Flipped component detected

21816 Quality is too low for optical centering

21817 No component in front of the camera or component not bright enough

21821 Measured size outside tolerance

21822 Measured size in X outside tolerance

21823 Measured size in Y outside tolerance

21826 Position (approcimate) cannot be determined

21827 Angle (approcimate) cannot be determined

21828 Position (fine) cannot be determined

21831 Not all features of the component were detected

21832 Not all ball features of the component were detected

21833 Features outside positional tolerance

21834 Ball features outside positional tolerance

21841 Nozzle is soiled

21842 Nozzle duct blocked

21843 Nozzle wom

22001 X-Feeder: Component was not transported into specified position in the defined time.

21880 Measurement with 3D sensor failed

21881 Measurement with 3D sensor: Not all connections were found

21882 Measurement with 3D sensor: At least one connection is damaged

21883 Measurement with 3D sensor: Coplanarity outside tolerance

21884 Measurement with 3D sensor: Distance between component and sensor too small

21885 Measurement with 3D sensor: Distance between component and sensor too large

21886 Measurement with 3D sensor: Component tilted too much

22002 X-Feeder: Component was not transported into specified position in the defined time.

22004 X-Feeder: Foil tom

22005 X-Feeder: Foil removal incorrect

22006 X-Feeder: Foil removal device blocked

22015 X-Feeder: Feeder not mounted or communication to feeder interrupted.

22017 X-Feeder: Tape drive of the feeder is not referenced

22018 X-Feeder: Low foil tension

OIS Datenbank Version 4.1 Schnittstellenbeschreibung

OIS Database Version 4.1 Interface Description

25 von 47

1 Allgemeines

Die Software OIS (Operator Information System) wickelt die Betriebsdatenerfassung für die SIPLACE

Bestückautomaten ab. Die Daten werden in einer Datenbank gespeichert. Damit Fremdbenutzer / 3

Party-

Anwendungen diese Daten abrufen und verarbeiten können, werden hier Funktionsweisen der Software OIS

sowie das Datenbankformat für die darin zur Verfügung gestellten Daten beschrieben.

2 Datenschnittstelle

Alle abrufbaren Daten aus der OIS-Datenbank werden über Datenbank-Views zur Verfügung gestellt.

Dadurch wird sichergestellt, dass sich auch nach einer eventuellen Änderung des Datenbankformats die

Datenbankschnittstelle nicht (zwingend) verändert. Alle Views können nur gelesen werden; ein schreibender

Zugriff ist nicht möglich. Wenn Zeichenketten (Strings) übergeben werden, so wird dies ohne

Längenbegrenzung durchgeführt. D. h. die übergebenen Werte entsprechen immer dem tatsächlich in der

Datenbank vorliegenden Format, da die ODBC-Schnittstelle einen variablen Zugriff zulässt. Eine mögliche

Änderung der String-Längen innerhalb der Datenbank bewirkt also immer auch eine korrekte Weitergabe

über ODBC.