205020 OTS Standalone Manual.pdf - 第40页
PROGRAMMING DIAGNOSTICS 2.8 Over the Top Snuggers (OTS) Manual Chapter Issue 3 Aug 1 4
PROGRAMMING
DIAGNOSTICS
Chapter Issue 3 Aug 14 Over the Top Snuggers (OTS) Manual 2.7
Cycle OTS Over
Top Clamp
This functionality moves the top clamp forward and backward in a repeating
cycle.
Cycle OTS Mid
Plate Up and
Down
This functionality moves the mid plate up and down in a repeating cycle.
Cycle OTS
Snugger and
Brake
This functionality moves the snugger in and brings the brake on, and takes the
brake off and the snugger out in a repeating cycle.
Cycle OTS Top
Plate Up and
Down
This functionality moves the top plate up and down in a repeating cycle.
Cycle OTS
Clamps
This functionality allows all of the parts in the OTS to move in a repeating
cycle, synchronised together.
NOTE
The system sets the number of cycles to be performed from the cycle count;
when the number of cycles is reached the diagnostic stops.
Using the Adjust button, the following can be set:
• Board Width
• Clamp Pressure
• Snug Pressure
• Retain Board
• Cycle Count (from 1 to 999999)
PROGRAMMING
DIAGNOSTICS
2.8 Over the Top Snuggers (OTS) Manual Chapter Issue 3 Aug 14
A3 DRAWINGS
ELECTRICAL DRAWINGS
Chapter Issue 2 Aug 14 Over the Top Snuggers (OTS) Manual 3..1
CHAPTER 3 A3 DRAWINGS
ELECTRICAL DRAWINGS
Description Drawing No. Sheets Issue State
Circuit Diagram Over Top Snugging (OTS) 200662 1 03
Circuit Diagram Pneumatic 202994 1 02