5OM-1626-001_w.pdf - 第4页
1 1OM-1610 Before Use W e are grateful to you for purchasing Hitachi direct-drive modular mounter (chip mounter). This machine can be used to place the chip-type electronic components on PCBs. This instruction manual des…
Before using this manual, please note the following items.
1. The contents of this manual are subject to change for improvement
without prior notice. Please pay attention to the latest information such as
the CS news that will be provided or issued by our company.
2. The copyright of the instruction manual belongs to Hitachi High-Tech
Instruments Co., Ltd.
This manual shall not in any shape or form, in whole or part, be
reproduced, copied or disclosed to any third party without the written
content of the publisher.
3. Our company shall not be held to any liability for any damages suffered
or incurred by the end user, arising from any operations other than those
(in
clu
ding the purposes and methods) described in this instruction manual.
Be sure to handle the machine carefully.
4. This ins
truction manual neither guarantees any license to industrial
property rights, etc., nor grants any license of such rights.
0911-001
5OM-1610
1
1OM-1610
Before Use
We are grateful to you for purchasing Hitachi direct-drive modular mounter (chip
mounter).
This machine can be used to place the chip-type electronic components on PCBs.
This instruction manual describes the functions, handling, and operations of the machine
for those who have nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
0911-001
2
1OM-1610
About the Instruction Manual
This instruction manual is divided into the following ten volumes (booklets) on subjective
basis.
Volume 1 : Guide
This describes the basic usage of the machine and is prepared for those who will read
this manual for the rst time or have never used any direct-drive modular mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and
Operations", "Functions", "Procedures from Preparation to Completion of
Automatic Operation", and "Specications"
Volume 2 : Product & Set-up Menu
This describes the product menu and set up menu for those who have read "Volume 1:
Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/
Product Change Operations", "Pattern Programs", "Machine Performance Data",
etc.
Volume 3 : Maintenance Menu
This describes the maintenanse menu for those who have read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Device Check", "Various Operations",
"Machine Adjustment before Delivery", "System Setup", etc.
Volume 4 : Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR"
Window", etc.
Volume 5 : Pneumatic and Machine Diagrams
This provides various kinds of material such as pneumatic and electrical circuit
diagrams, etc.
[Coverage]
"Checking Items", "Safety Precautions", "Pneumatic Diagrams", "Parts
Location", "Electrical Circuit Diagrams", etc.
0911-001