5OM-1626-001_w.pdf - 第5页
2 1OM-1610 About the Instruction Manual This instruction manual is divided into the following ten volumes (booklets) on subjective basis. V olume 1 : Guide This describes the basic usage of the machine and is prepared fo…
1
1OM-1610
Before Use
We are grateful to you for purchasing Hitachi direct-drive modular mounter (chip
mounter).
This machine can be used to place the chip-type electronic components on PCBs.
This instruction manual describes the functions, handling, and operations of the machine
for those who have nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
0911-001
2
1OM-1610
About the Instruction Manual
This instruction manual is divided into the following ten volumes (booklets) on subjective
basis.
Volume 1 : Guide
This describes the basic usage of the machine and is prepared for those who will read
this manual for the rst time or have never used any direct-drive modular mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and
Operations", "Functions", "Procedures from Preparation to Completion of
Automatic Operation", and "Specications"
Volume 2 : Product & Set-up Menu
This describes the product menu and set up menu for those who have read "Volume 1:
Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/
Product Change Operations", "Pattern Programs", "Machine Performance Data",
etc.
Volume 3 : Maintenance Menu
This describes the maintenanse menu for those who have read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Device Check", "Various Operations",
"Machine Adjustment before Delivery", "System Setup", etc.
Volume 4 : Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR"
Window", etc.
Volume 5 : Pneumatic and Machine Diagrams
This provides various kinds of material such as pneumatic and electrical circuit
diagrams, etc.
[Coverage]
"Checking Items", "Safety Precautions", "Pneumatic Diagrams", "Parts
Location", "Electrical Circuit Diagrams", etc.
0911-001
3
1OM-1610
Volume 6 : Component Library
This includes an explanation of component library data and how to create it.
Volume 7 : Multi-Layer Tray Feeder
This section describes the multi-layer tray feeder and operation procedure.
Volume 8 : Recycle Conveyor
This section describes the recycle conveyor and operation procedure.
Volume 9 : Component Library Teaching Function
This section describes the component library data automatic and manual creations.
Volume 10 : Placement Position Teaching Function
This section describes the teaching and collection procedures for the PCB placement
position.
0911-001