00195398-0103-AI-01005Paket_DE_EN.pdf - 第42页
Asse mb ly In st ruct i on s 0100 5- Pac ket E di tio n 1 2 /20 07 42 3.1 Function Descrip tion In order to p lace 010 05 com ponen ts on a SIP LACE D 1/D2/D4 m achine, retrofitting as desc ribed in the following sect io…
Assembly Instructions 01005-Packet
Edition 12/2007
41
3 Assembly Instructions 1005-Pack-
age SIPLACE D1/D2/D4
NOTE:
This assembly instructions guide explains the 01005 components. In American English language
parts, 1005 is the official description for a component measuring 0,4 x 0,2 mm. Since metric length
and width measurement units are standard in the Asian speaking parts of the world, this compo-
nent bears the description "0402"(metric measurements) in Asian countries. 3
Assembly Instructions 01005-Packet
Edition 12/2007
42
3.1 Function Description
In order to place 01005 components on a SIPLACE D1/D2/D4 machine, retrofitting as described
in the following section is required. In addition, certain prerequisites must be fulfilled. 3
The 12-Segment C&P head (DLM 3) must be equipped with the high-resolution camera (type 38).
The placement is executed with a specific sleeve and a 905 nozzle which must be attached to the
placement head. A special feeder is used to ensure optimal loading of the components. 3
Fig. 23 12-segment collect & place head with component camera, sleeve and nozzle
(4) Component Camera C&P, Type 38, 16x16 digital
(5) Sleeve 01005 (SP12 sleeve/270° degree partition)
(6) Nozzle, Type 905
1
3
2
Assembly Instructions 01005-Packet
Edition 12/2007
43
3.2 Requirements
Retrofitting may only be performed by SIPLACE service technicians. 3
– SIPLACE Pro 5.x
– Station computer from SW 604.01
– 12-segment C&P head (DLM 3)
– Retrofit kit [00119920-01-xx] consisting of:
– 03054857-01 1 x 01005 package for D4/D
2/D1
- 03057009-01 2 x adjustment sheet D4 / 1mm
- 03062029-01 2 x adjustment sheet D4 / 0.5mm
- 03063571-01 1 x locking plate D4 / 01005
- 00343075-01 2 x washers DIN 9021 - 3.2 - 140 HV - A2
- 03051870-01 1 x component camera C+P (type38) 16x16 digital
- 03054107-01 3 x sleeve SP12 comp. / 270 degree partition
- 03057320-01 12 x nozzle type 905 comp. ESD / 1x0.15
- 00195398-01 1 x assembly instructions 01005 package for D4/D2/D1, D+E
– Tape feeder 3x8mm S-Tape 01005 CO [00176100-xx]
3.2.1 Parts Required for SIPLACE D4 Machines
For optimization of the changeover table height for SIPLACE D4 machines, you require the follow-
ing parts: 3
– Adjustment sheets 1.0 mm and 0.5 mm for D4 machines (supplied with retrofitting kit)
– Locking plate with washers (supplied with retrofitting kit)
– Nozzle 901 or 925
– Changeover table measuring gauge
– CACCIA test program
For instructions about how to proceed, see from section 3.6.5 on page - 49 onwards. 3
3.2.2 Additional Documentation Required
– Operating manual for relevant machine