00193727-02.pdf - 第22页
2 Change Instructions Running block covers Running block covers SIPLACE HS-50 10/2005 Edition 22 : Clip front seal over guiding rail and snap it in cover . 2 Abb. 2.10 - 12 Clip front seal 2 : Insert and tighten new scre…
Running block covers SIPLACE HS-50 2 Change Instructions Running block covers
10/2005 Edition
21
: Extract fitting pieces.
2
Abb. 2.10 - 10 Extraction of fitting pieces
: Slide cover on runner block.
2
Abb. 2.10 - 11 Sliding of cover on runner block
2
Pay attention for correct insert of lubrication channel in the corresponding grooves in cover. 2
2
Grooves for lubrication channels
2 Change Instructions Running block covers Running block covers SIPLACE HS-50
10/2005 Edition
22
: Clip front seal over guiding rail and snap it in cover.
2
Abb. 2.10 - 12 Clip front seal
2
: Insert and tighten new screws (please note: the new screws already equipped with screw lok-
king varnish).
2
Abb. 2.10 - 13 Insertion of new screws
2
2
2
2
2
Running block covers SIPLACE HS-50 2 Change Instructions Running block covers
10/2005 Edition
23
: Exchange of outer lubrication nozzles.
2
Abb. 2.10 - 14 Exchange of outer lubrication nozzles
2
On the outer covers only exchange the lubrication nozzles. 2
: Remove allen screw and exchange reflector.
2
Abb. 2.10 - 15 Mounting of reflectors
2
2
old reflector
new reflector