X-Serie S_705.pdf - 第69页
69 Technical data Placement machine dimensions Placement machine center of gravity X = 0 mm Y = 0 mm Z = 630 mm
68
Technical data
Dimensions and setup conditions
Length
a
Without conveyor extension and without hand guard
Without conveyor extension and with hand guard
With conveyor extension (one end)
With conveyor extension (two ends)
a) Measured at the outer contour of the machine protection.
1915 mm
1948 mm
2191 mm
2433 mm
Width
Outer contour of machine protection
With monitor and keyboard
On the component trolley and table position "outermost" (handle folded in)
On the component trolley and table position "outermost" (handle folded
out)
2647 mm
2940 mm
2890 mm
3640 mm
Height of machine (for PCB conveyor height 930 mm)
Up to upper edge of monitor
With 2-color indicator lamp
With 3-color indicator lamp
Without indicator lamp (height of packaging)
With folded-up protective covers
1630 mm
1852 mm
1893 mm
1658 mm
2120 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
195 mm ± 15 mm
225 mm ± 15 mm
245 mm ± 15 mm
Weight
SIPLACE X4i S (machine without component trolley)
SIPLACE X4i S (fully equipped with feeder modules)
SIPLACE X4 S (machine without component trolley)
SIPLACE X4 S (fully equipped with feeder modules)
SIPLACE X3 S (machine without component trolley)
SIPLACE X3 S (fully equipped with feeder modules)
SIPLACE X2 S (machine without component trolley)
SIPLACE X2 S (fully equipped with feeder modules)
3,430 kg
4,000 kg
3,430 kg
4,000 kg
3,410 kg
3,970 kg
3,390 kg
3,950 kg
Location
b
b) Measured at the outer contour of the machine protection and at the keyboard (without conveyor extension).
5.73 m²
Load per unit area
X-Series with 4 component trolley X 6.1 kN/m²
Number of machine feet 6
Max. noise emissions 75 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75 % (no higher than 45% on
average to prevent any possibility of
condensation on the machine)
69
Technical data
Placement machine dimensions
Placement machine center of gravity
X = 0 mm
Y = 0 mm
Z = 630 mm
70
Technical data
Maneuvering radii for the X component trolleys
Maneuvering radius R 600 mm
Distance L1: Machine center to outer edge of X component
trolley
1470 mm
Distance L2: Machine center to wall 2070 mm