00191185-01.pdf - 第20页
Retrofitting Instructions Feeder Fastening Attachment (Addition) for Component Tab le SIP LACE 80 S-20/F4/S-15/F3 Edition 05/98 Seite 9 Location of drilling jig fo r feeder f astening attac hme nt Fas tening hole s 5 x 3…
Retrofitting Instructions Feeder Fastening Attachment (Addition) for Component Table SIPLACE 80 S-20/F4/S-15/F3
Edition 05/98
Seite 7
4 Mounting the Feeder Fastening Attachment
• Mount the drilling jig on the component table (see Fig. 1).
•
Using a 3.3 mm drill, drill the 5 holes required.
•
Use a M4 tap to cut the 5 threads required.
•
Fasten the to the component table with the M4 x 4 socket head cap screws in the retrofitting kit
(see Fig. 2).
5 Final Steps
5.1 SIPLACE 80 S-20/F4/S-15/F3
•
Move the two component tables into the placer.
•
Fasten the component tables in place with the horizontal tensioners.
•
Make all electrical connections.
•
Set up the component tables once again
5.2 SIPLACE 80 F4/F3 with WPC
•
With the assistance of a second person, lift the component table on the right-hand side into the placer.
WARNING O O
You will require the assistance of the second person to lift the component table. It is heavy and the risk of
injury is high.
• Using the two socket head cap screws, fasten the component table in place.
• Move the WPC into the placer.
• Move the component table on the left-hand side into the placer.
• Fasten the component table in place with the horizontal tensioners.
•
Make all the electrical connections.
•
Set up the component tables once again.
Feeder Fastening Attachment for Component Table (Optional) SIPLACE 80 S-20/F4/S-15/F3 Retrofitting Instructions
Edition 05/98
Seite 8
Feeder fastening
attachment
Fig. 2 a
Fig. 1 a
Fig. 1 b
Retrofitting Instructions Feeder Fastening Attachment (Addition) for Component Table SIPLACE 80 S-20/F4/S-15/F3
Edition 05/98
Seite 9
Location of drilling jig for feeder fastening attachment
Fastening holes 5 x 3.4mm
5 x M4 tread for fastening screws (countersunk) 5 x M4 x 10
Fig. 2 b