UniSite_xpi_User_Manual.pdf - 第301页
Data Source /Dest ination set t o RAM fi le. Data transf er co mplete. Data transf er co mplete. Data Sum = ss ssssss. Data transf er co mplete. Data Sum = ss ss. Xmit = ssss. Data transf er co mplete. Data Sum = ss ss. …
Constructing Job File Directory.
Copying file1.ext to file2.ext. Bytes copied = xxxx.
Copying sectors ssss - ssss+120 Reading source disk.
Copying sectors ssss - ssss+120. Writing destination disk.
Could not initialize default system parameters from disk.
Could not initialize default system parameters from disk.
Current system and disk system have different revisions.
Data conversion error.
Data Load Err
Data record error.
Data size exceeded user memory.
Data Source/Destination set to RAM file.
Data transfer complete.
Data transfer complete. Data Sum = ssssssss.
Data transfer complete. Data Sum = ssss. Xmit = ssss.
Data transfer complete. Data Sum = ssss. POF CRC = ssss.
Data operation complete: data saved on disk.
Data verify error.
Destination file already exists.
Destination file already exists. Hit return to continue, ^Z to abort.
Device Alg Err
Device algorithm not found:
Device Insertion Warning. Press F3.
Device must be previously selected:
DEVICE SPECIFIC FAILURE: Backward device.
DEVICE SPECIFIC FAILURE: Cannot synchronize to device.
DEVICE SPECIFIC FAILURE: DAC setting out of range.
DEVICE SPECIFIC FAILURE: Device programming error.
DEVICE SPECIFIC FAILURE: Device verification error.
DEVICE SPECIFIC FAILURE: Device verification error.
DEVICE SPECIFIC FAILURE: EEPROM at $B800 not allowed.