UniSite_xpi_User_Manual.pdf - 第306页
Empty Socke t End of file . Entry into CRC n ot allowed du ring job file rec ording or playback . ER_ALG_DYN_ LINK Extension ‘ .SYS’ is reserved for syst em use. Factory set ting save file is protecte d: Fatal syste m er…
Disk error, terminal type not saved!
Disk open error. Type ESC and Control W to reboot.
Disk write-protected, terminal type not saved!
Done.
Done. Bytes copied = nnnnnn.
Done: Certain tests not performed due to Socket not empty.
Edit begin address must be greater than or equal to offset.
Elec Erase Err
Elec ID Err
Electronic bulk erase not supported by device.
Electronic ID not supported by device.
Empty Socket.
Empty Socket
End of file.
Entry into CRC not allowed during job file recording or playback.
ER_ALG_DYN_LINK
Extension ‘.SYS’ is reserved for system use.
Factory setting save file is protected:
Fatal system err
File already exists.
File does not exist.
FILE ERROR: Cannot access yield data.
FILE ERROR: Can’t reach track 0.
FILE ERROR: Data transfer error.
FILE ERROR: Disk change detected.
TEST ABORTED: Waveform board test must pass before PCU can be tested.
TEST HALTED: Socket not empty, hit return to continue, ^Z to abort.
Testing
The operation was not enabled.
Transferring data.
[transparent mode]
Trc init err
Too many revisions of the same Custom Menu algorithm.
Unable to load algorithm. Perform the Restore System Parameters operation.
Unable to load power up device algorithm.
Unknown command.