my300-brochure.pdf - 第9页

17 18 AB59825 Rev 0000 / May 2017 NETHERLANDS My cronic B. V . High T ech Campus 10 5656 AE Eindho ven Netherlands T el: +31 402 62 06 67 SINGAPORE My cronic Pte ., Lt d. 9 T agore Lane, #0 2-08/ 09 9@T agore Singapore 7…

12 13

AUTOMATION DOWN TO THE SMALLEST DETAIL

Mycronic’s planning software makes it possible

to analyze hundreds of work orders and organize

them into family kits, perfectly sized to ensure

hours of non-stop production. With the help of

proactive replenishment notiﬁ cations, you’ll ﬁ nally

be able to close the e ciency gap between volume

and short-series production. Now with automated

board train functionality, job selection and convey-

or width, you’ll also beneﬁ t from operator-inde-

pendent production with completely centralized

programming.

BUILD PRODUCTS, NOT INVENTORY

With changeovers this easy, any job is possible.

Batch sizes can be optimized for downstream

operations including inspection, testing and box

build. And instead of building stock inventory,

you can build-to-order, thereby reducing risk and

working capital while removing the risk of old-revi-

sion products.

MY300SX – THE FUTURE OF FLEXIBILITY

At up to 24,000 CPH, the MY300SX gives you the

ﬂ exibility you need to tackle tomorrow’s challenges.

It is ideal for high-mix production, handling up to

192 feeders and an endless variety of components.

Advanced mountheads, state-of-the-art vision

systems and a wide selection of conveyor sizes all

ensure that the line is able to accommodate a range

of board sizes, shapes and technologies. Based on

the same technology platform as the MY300DX, the

MY300SX features a single mounthead carrier that

picks components from both sides of the machine.

This provides incredible ﬂ exibility while maintain-

ing the ability for on-the-go setups and seamless

changeovers from one production run to another.

The high-precision linear drive and distributed servo

technology provide the ability to increase through-

put, while continuous accuracy calibration maintains

the high level of quality that you would expect from

a Mycronic machine.

As batch sizes shrink and the number of process steps expands, uptime

doesn’t have to su er. By combining software-driven solder paste and

assembly ﬂ uid application with high feeder capacity, continuous opera-

tion is both easy and economical – down to small batch sizes, or even a

single board.

Fully automated short

series production

FULLY AUTOMATED

KEY BENEFITS

- Full component range

in one machine

- Fastest set-ups and

changeovers in the industry

- Capable of pin-in-paste, PoP,

QFN, board cavities and more

- Stencil-free printing

- The world’s fastest assembly

ﬂ uid dispensing system

- On-the-spot board revisions

- Handle short tape strips and

nonstandard carriers

MY300SX-11/15

Automated short series production.

MY700JX in-line with a MY300SX.

14 15 16

Although technologies may change, as a start-up

contract manufacturer you’ll always be able to

adapt.

HANDLE ANY ORDER – TODAY AND TOMORROW

Whether your components arrive in short tape

strips, matrix trays with oversized pockets or just

a plastic bag, the ﬂ exible system software of the

MY300 turns nearly anything into a component

feeder. And with the stencil-free printing and assem-

bly ﬂ uid dispensing of the MY700, even last-second

customer changes can be done on the spot, when-

ever necessary. Whatever quantity, whatever tech-

nology and whatever size component, this is a pair of

machines that grows with your business.

MY700 – DOUBLE YOUR CAPABILITIES

The MY700 is completely software driven, apply-

ing solder paste or any other assembly ﬂ uid onto

any type of board with high speed and precision.

QFNs, pin-in-paste, package-on-package, encap-

sulation or other applications that have yet to be

invented – all of these techniques can be carried out

with unmatched precision and ﬂ exibility. Now with

dual-head capabilities, the MY700 allows you to

combine solder paste and assembly ﬂ uid dispensing

– all in a single machine.

With the MY700, the dual jetting heads can be used

to achieve both small-dot and large-dot jetting at

speeds of more than one million dots per hour. And

with no need for stencils, you’ll never have to com-

promise on solder joint quality, time-consuming

rework or stencil changes. Instead of days, you can

prepare jobs in minutes. If you do 2-3 setups a day,

using more than 50 stencils a year, you’ll quickly

realize the beneﬁ ts. If total solder paste volume con-

trol, quality consistency and complex pin-in-paste

or other challenging applications are critical, you’ll

understand even better.

Combine a MY700 jet printer and dispenser with a MY300 pick-and-place

machine, and you’ll never have to say no to another customer. Instead,

you’ll be able to handle any package or assembly ﬂ uid – and place it on

nearly any surface – for the entire lifespan of your machines.

The all-in-one

future-proof solution

ALL-IN-ONE

KEY BENEFITS

- Full component range in one

machine

- Fastest set-ups and change-

overs in the industry

- Capable of pin-in-paste, PoP,

QFN, board cavities and more

- Stencil-free printing

- The world’s fastest assembly

ﬂ uid dispensing system

- On-the-spot board revisions

- Handle short tape strips and

non-standard carriers

MY300SX/LX

All-in-one solution. MY700 in-line

with a MY300SX/LX.

FOR DECADES, Mycronic’s innovations have been changing the face of

the high-mix SMT industry – from stencil-free jet printers and the world’s

fastest jet dispensers, to fast-loading intelligent feeder systems, automated

near-production storage and advanced software solutions.

All one-of-a-kind technologies. And all with one goal in mind: to simplify

and streamline an increasingly complex production environment with a

single integrated intelligent factory solution.

With Mycronic 4.0, all of this collective knowledge and innovation

amounts to a complete, agile manufacturing environment that masters the

complexities of modern electronics production.

The result is one highly automated, intelligent factory for just-in-time

production, with 100% stock accuracy. One that adapts to meet your needs

and solve future challenges – before they arrive.

At Mycronic, we believe that future of SMT production is already here.

IS YOUR FACTORY PREPARED?

Fully integrated with the

SMD Tower automated material

handling system, MYCenter

software suite and award-winning

Agilis feeder systems, the new

MYPro series is designed for full

compatibility with the Mycronic 4.0

intelligent factory.

17 18

AB59825 Rev 0000 / May 2017

NETHERLANDS

Mycronic B.V.

High Tech Campus 10

5656 AE

Eindhoven

Netherlands

Tel: +31 402 62 06 67

SINGAPORE

Mycronic Pte., Ltd.

9 Tagore Lane, #02-08/09

9@Tagore

Singapore 787472

Tel: +65 6281 7997

SOUTH KOREA

Mycronic Co. Ltd.

3rd Floor, Jung-San

Bldg. 1026-8

Sanbon-Dong, Gunpo-Si

Gyeonggi-Do, 15808

South Korea

Tel: +82 31 387 5111

Mycronic Ltd.

Unit 2, Concept Park

Innovation Close

Poole, Dorset, BH12 4QT

Tel: +44 1202 723 585

USA

Mycronic Inc.

320 Newburyport Turnpike

Rowley, MA 01969

USA

Tel: +1 978 948 6919

mycronic.com

SWEDEN

Mycronic AB

PO Box 3141

Nytorpsvägen 9

SE-183 03 Täby

Sweden

Tel: +46 8 638 52 00

CHINA

Mycronic Co., Ltd.

Unit 106, E Block

Lane 168, Da Duhe Road.

Putuo District, 200062

Shanghai P.R. China

Tel: +86 21 3252 3785/86

FRANCE

Mycronic S.A.S.

1 rue de Traversière - CS 80045

94513 Rungis Cedex 1

France

Tel: +33 1 41 80 15 80

GERMANY

Mycronic GmbH

Biberger Straße 93

D-82008 Unterhaching bei München

Germany

Tel: +49 89 4524248-0

JAPAN

Mycronic Technologies KK

Chofu Center Bldg.

1-18-1 Chofugaoka, Chofu-shi

Tokyo 182-0021

Japan

Tel: +81 42 433 9400

Speciﬁ cations are subject to change without notice.

Mycronic, MYDATA, MYDATA automation and MY; MY100, MY100DX, MY100SX, MY100LX, MY100e, MY100HXe, MY100DXe, MY100SXe, MY100LXe, MY200,

MY200HX, MY200DX, MY200SX, MY200LX, MY300, MY300DX, MY300SX, MY300LX, MY500, MY600, MY600JD, MY600JP, MY600JX, MY700, MY700JD,

MY700JP, MY700JX and MYSynergy; T3, T4, T5 and T6; HYDRA Speedmount, Midas, ISIC; Agilis, Agilis Linear Magazine (ALM), Agilis Linear Magazine Flex

(ALM FLEX), Agilis Stick Magazine (ASM), Agilis Tray Magazine (ATM), Mycronic Tray Exchanger (TEX), Mycronic Tape Magazine (TM), Mycronic Tray Wagon

Magazine (TWM); Mycronic Dip Unit (DPU); Mycronic SMD Tower; Mycronic Standard Vision System (SVS), Mycronic Dual Vision System (DVS), Mycronic Linescan

Vision System (LVS), Mycronic HYDRA Vision System (HVS); Mycronic Assembly Process Management (APM) including; JPSys, TPSys, MYLabel, MYPlan, MYCenter,

MYTrace, MYCam, FlowLine and Cad Conversion are registered trademarks or trademarks of Mycronic AB. Mycronic AB is ISO 9001:2015 and ISO 14001:2015 certiﬁ ed.