00193348-01.pdf - 第16页

Instructions for changing catch on component feeder table HS-50 11/2001 Issue 16 : Remove the plug c onnector o f the c omponent c art. : Remove the screws on the si de wall o f the plac ement m achine an d remov e the s…

Instructions for changing catch on component feeder table HS-50

11/2001 Issue

: Mount the latch bolt on the guard (see the photographs)

: Atttach the actuator using the two PT cheese-head screws.

: Now fix the guard back onto the cover plate.

Note:

Left-mounted

variant

Instructions for changing catch on component feeder table HS-50

11/2001 Issue

: Remove the plug connector of the component cart.

: Remove the screws on the side wall of the placement machine and remove the side wall

completely.

Instructions for changing catch on component feeder table HS-50

11/2001 Issue

: Remove the plug connector for the component feeder table catch, and then remove the snap-

action switch and cable.

: Attach the new connector and feed the cable round the corner of the placement machine.

: Fix the mounting plate to the side wall using a screw and a washer.

Remember to pay special attention to left and right mounting when attaching the plate. 2

. 2