IPC-A-610C(电子组装件的验收条件).pdf - 第3页
IPC-A-610C CH Developed by the IPC T ask Group (7-31b) of the Product Assurance Subcommittee (7-30) of IPC Users of this standard are encouraged to participate in the development of future revisions. Contact: IPC 2215 Sa…
The Department of Defense adoption notices for IPC/EIA J-STD-001, IPC-HDBK-001 and IPC-A-610 are reprinted below.
IPC-A-610, ‘‘Acceptability of Electronic Assemblies,’’ was adopted on 12-FEB-02 for use by the Department of
Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Com-
mander, US Army Tank-Automotive and Armaments Command, ATTN: AMSTA-TR-E/IE, Warren, MI 48397-
5000.
J-STD-001, ‘‘Requirements for Soldered Electrical and Electronic Assemblies,’’ was adopted on 19-JUL-01 for
use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD
Adopting Activity: Commander, US Army Tank-Automotive and Armaments Command, ATTN: AMSTA-TR-E/
IE, Warren, MI 48397-5000.
IPC-HDBK-001, ‘‘Handbook and Guide to Supplement J-STD-001 (includes J-STD-001B to C Comparison)
(IPC-HDBK-001 with Amendment 1),’’ was adopted on 19-JUL-01 for use by the Department of Defense
(DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, US
Army Tank-Automotive and Armaments Command, ATTN: AMSTA-TR-E/IE, Warren, MI 48397-5000.
The Principles of
Standardization
In May 1995 the IPC’s Technical Activities Executive Committee adopted Principles of
Standardization as a guiding principle of IPC’s standardization efforts.
Standards Should:
• Show relationship to Design for Manufacturability (DFM) and Design for the
Environment (DFE)
• Minimize time to market
• Contain simple (simplified) language
• Just include spec information
• Focus on end product performance
• Include a feedback system on use and problems for future improvement
Standards Should Not:
• Inhibit innovation
• Increase time-to-market
• Keep people out
• Increase cycle time
• Tell you how to make something
• Contain anything that cannot be defended with data
Notice
IPC Standards and Publications are designed to serve the public interest through eliminating
misunderstandings between manufacturers and purchasers, facilitating interchangeability and
improvement of products, and assisting the purchaser in selecting and obtaining with minimum
delay the proper product for his particular need. Existence of such Standards and Publications
shall not in any respect preclude any member or nonmember of IPC from manufacturing or sell-
ing products not conforming to such Standards and Publication, nor shall the existence of such
Standards and Publications preclude their voluntary use by those other than IPC members,
whether the standard is to be used either domestically or internationally.
Recommended Standards and Publications are adopted by IPC without regard to whether their
adoption may involve patents on articles, materials, or processes. By such action, IPC does not
assume any liability to any patent owner, nor do they assume any obligation whatever to parties
adopting the Recommended Standard or Publication. Users are also wholly responsible
for protecting themselves against all claims of liabilities for patent infringement.
©Copyright 2000. IPC, Northbrook, Illinois. All rights reserved under both international and Pan-American copyright conventions.
Any
copying, scanning or other reproduction of these materials without the prior written consent of the copyright holder is strictly prohibited and
constitutes infringement under the Copyright Law of the United States.
IPC-A-610C CH
Developed by the IPC Task Group (7-31b) of the Product Assurance
Subcommittee (7-30) of IPC
Users of this standard are encouraged to participate in the
development of future revisions.
Contact:
IPC
2215 Sanders Road
Northbrook, Illinois
60062-6135
Tel 847 509.9700
Fax 847 509.9798
ASSOCIATION CONNECTING
ELECTRONICS INDUSTRIES
®
July 25, 2000
Why is there
a charge for
this standard?
Your purchase of this document contributes to the ongoing development of new and updated
industry standards. Standards allow manufacturers, customers, and suppliers to understand one
another better. Standards allow manufacturers greater efficiencies when they can set up their
processes to meet industry standards, allowing them to offer their customers lower costs.
IPC spends hundreds of thousands of dollars annually to support IPC’s volunteers in the
standards development process. There are many rounds of drafts sent out for review and the
committees spend hundreds of hours in review and development. IPC’s staff attends and
participates in committee activities, typesets and circulates document drafts, and follows all
necessary procedures to qualify for ANSI approval.
IPC’s membership dues have been kept low in order to allow as many companies as possible to
participate. Therefore, the standards revenue is necessary to complement dues revenue. The price
schedule offers a 50% discount to IPC members. If your company buys IPC standards, why not
take advantage of this and the many other benefits of IPC membership as well? For more infor-
mation on membership in IPC, please visit www.ipc.org or call 847/790-5372.
Thank you for your continued support.