Nordson-EFD-Series-450-Instructions.pdf - 第8页
Series 450 Autovalve / Snuff Back | Instructions / Parts Lists 8 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. P/N Ref. # Qty. Descrip…
Series 450 Autovalve / Snuff Back | Instructions / Parts Lists
7www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
P/N Ref. # Qty. Description
7702265 1 1 Single Air Cylinder 5/16" stroke with Hardened SS Shafts
— 2 2 SHCS 10-24 x 2" long for 450 Series
— 3A 6 Lip Seal: Viton U-cup and Viton O-Ring
7702281 3B 6 Lip Seal: PU U-cup and Viton O-Ring
7702280 3C 6 Lip Seal: PTFE U-cup and PTFE O-Ring
7702277 3D 6 Lip Seal: UHMPE U-cup and SS Spring
7702268 4 2 Grease Fitting, 10-32
7702270 5 1 Aluminum Tie Plate
— 6A 6 Viton O-Ring
7702810 6B 6 EP O-Ring
7702275 6C 6 PTFE Encapsulated O-Ring
7702284 7A 1 AlumBody 9/16-18 Inlet Ports for 450 Valve
— 7B 1 SS Body 9/16-18 Inlet Ports for 450 Valve
7702288 8 1 Stainless Steel Seat Plate for 450 Valve
— 9 2 Stainless Steel SHSS 1/4" Dia x 1 1/2" long for 450 Valve
— 10 2 Assembled Air Tube and Fitting 10-32 Thread
7702364 11 1 Auto Grease 3 oz Cartridge (not shown)
7702372 12 1 Grease Gun 3 oz Cartridge Complete (not shown)
— 13 1 Adjustment Screw Driver for 450 Valve
NOTE: The O-rings in the lip seals face
the body (item 7). For proper alignment
see page 6. Consult factory for
additional seal combinations.
Maintenance (continued)
Series 450 Autovalve / Snuff Back | Instructions / Parts Lists
8 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
P/N Ref. # Qty. Description
7702292 30A 1 Alum Manifold / 160 Ser. 7/8-14 Thread, 1:1 Ratio
7702293 30B 1 SS Manifold / 160 Ser. 7/8-14 Thread, 1:1 Ratio
— 31A 1 Alum Manifold / 160 Ser. 7/8-14 Thread, 1:1 Ratio with 1/4 NPT Solvent Port
7702349 33A 1 Alum Manifold / 160 Ser. 7/8-14 Thread, Wide Ratio
7702294 36 4 SHCS 10-24 x 2 1/2" long for 450 Manifold
— 38A 1 Check Valve: Brass Solvent Flush
— 38B 1 Check Valve: Stainless Steel Solvent Flush
— 40A 1 Polypropylene fitting, 10-32 with 0.09" orifice
— 40B 1 Polypropylene fitting, 10-32 with 0.06" orifice
7702329 40C 1 Polypropylene fitting, 10-32 with 0.04" orifice
Manifolds for Series 160 Disposable Mixers
Series 450 Autovalve / Snuff Back | Instructions / Parts Lists
9www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Hand Held with Pneumatic Switch #7701977
NOTE: Ref. numbers 101, 103, and 110 can be purchased assembled as P/N 7702388.
P/N Ref. # Qty. Description
— 90 1 Handle / Aluminum / Cartridge Option
7702317 91 1 Trigger for Mount H or E
— 92 1 Trigger Bolt, 8-32 x 3/4" long
— 93 1 Trigger Guard for 400 / 450 Switches
— 94 1 6-32 x 5/16" FHSHCS for 400 / 450 Switches
— 95 1 6-32 x 1/2" FHSHCS for 400 / 450 Switches
— 96 1 Safety Lock for 400 / 450 Switches
— 97 1 1/2" OD x 1/16" O'Ring for 400 / 450 Switches
— 98 2 SHCS 10-24 x 1/2" long for Mount S, E or H
— 101 1 Protective Rubber Boot for 400 / 450 Switches
— 103 1 4 Way Cartridge Valve for Pneumatic Handle
— 104 1 Brass Plug 10-32
— 105 1 10-32 Barbed Air Fitting
— 106 1 3/4" Dia. Acetal Plug
— 107 4 10-32 UNF Elbow Air Fitting
— 110 1 E-Clip
7702308 111 2 1/8" ID Air Tubing x 2.00"
105
104
98
92
91
94
93
95
96
97
103
90
106
107
111
110
101
Mount