Foreign Machine Interface.pdf - 第2页
FOREIGN MACHINE INTERFACE FMI POD 28.2 Technical Re ference Manual Chapter Issue 3 Jan 08 FMI POD The FMI Pod is only used where both the upline and downline are using SMEMA, Fuji or Panasonic interfaces. For all other i…
FOREIGN MACHINE INTERFACE
INTRODUCTION
Chapter Issue 3 Jan 08 Technical Reference Manual 28.1
CHAPTER 28 FOREIGN MACHINE INTERFACE
INTRODUCTION
The Foreign Machine Interface (FMI) is an electrical means of communication
between the DEK machine and an adjacent machine/conveyor, using electrical
signals. The signals are transferred using opto-couplers and/or solid state
relays which keep the machines electrically isolated.
The DEK machine can interface with many different types of adjacent machine.
The machines utilize a set of timing and control signals (protocols) for commu-
nication with adjacent machines. There are two different types of interface
available for the DEK machine:
• An FMI Pod for SMEMA, Fuji or Panasonic protocols
• A Multi-Interface Unit (MIU) for all other protocols
The FMI Pod and the MIU are supplied with the following cables:
• An FMI loom which connects the FMI port on the machine controller, to the
MIU or FMI Pod
• Two interface cables, one cable for each adjacent machine
The adjacent machine/conveyor can be in the following configurations:
Figure 28-1 Machine Arrangements for Board Transfers
Left to Right Board Transfers
Right to Left Board Transfers
Upline
Downline
UplineDownline
Left to Left Board Transfers Right to Right Board Transfers
Upline
Downline
Upline
Downline
DEK
Machine
DEK
Machine
DEK
Machine
DEK
Machine
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
Adjacent
Machine/
Conveyor
FOREIGN MACHINE INTERFACE
FMI POD
28.2 Technical Reference Manual Chapter Issue 3 Jan 08
FMI POD The FMI Pod is only used where both the upline and downline are using
SMEMA, Fuji or Panasonic interfaces. For all other interfaces refer to the MIU
interface later in this chapter.
The DEK FMI Pod is a communications interface that allows DEK Printing
Machines to communicate with upline and downline board handlers.
03 Board Available (Input)
10 Board Pass (Input)
01 Dek M/C Available (Output)
16 Downline M/C Available (Input)
19 Board Available (Output)
24 Board Pass (Output)
Upline
Downline
M28SK02
External Service Panel
POWER ON
PART No. 160740
M/C AVAILABLE
BOARD AVAILABLE
BOARD PASS
DOWNLINE
BOARD AVAILABLE
BOARD PASS
M/C AVAILABLE
UPLINE
18 Board Available (Input)
05 Board Pass (Input)
15 Dek M/C Available (Output)
09 Downline M/C Available (Input)
06 Board Available (Output)
13 Board Pass (Output)
Upline
Downline
M28PL01
FMI POD
FOREIGN MACHINE INTERFACE
FMI POD
Chapter Issue 3 Jan 08 Technical Reference Manual 28.3
FMI Loom
NC
NC
NC
NC
NC
NC
M/C Available I/P
25
Send Downline O/P
0V
NC
NC
NC
+12V
+24V US
Downline Ready I/P
NC
NC
NC
DEK M/C Available O/P
NC
Send Upline O/P
Upline Ready I/P
NC
+24V SW
NC
Machine Controller
Enclosure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
FMI Pod
0V (24V)
0V (24V)
0V (24V)
+5V O/P
+5V O/P
Ready to Receive Downline O/P
M/C Available O/P
Send Downline I/P
+5V O/P
0V I/P
0V
+24V US
+24V US
+12V
+24V US
TX
RX
NC
DEK M/C Available I/P
0V
Send Upline I/P
Ready to Receive Upline O/P
NC
+24V SW
NC
M36SK04
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
193
007
192
128
126
191
014
023
013
127
PL01
193
007
192
128
126
191
014
023
013
127
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DEK M/C (SK) M28PL01