M6e_ServiceManual_e.pdf - 第35页
3 Mechanical Section 3-1 3 Mechanical Section
2 Periodical Checks
2-6
Stopper
Check for movement and noise.
Make sure there is no components on stopper.
Main Clamp
Check adjust plate for wear and flaw.
Side Clamp
Check for wear and flaw.
Rear Clamp
Check for wear and flaw.
Buffer Stopper
Check for wear and flaw.
ANC Clamp
Check for wear and flaw.
Nozzle Holder
Check for smooth movement of the nozzle escape.
Check that there is no flaw in the leaf spring.
Fixed Camera
Clean half mirror and lens (lens filter).
)
”Camera” in 3 Mechanical Section.
Teach Camera
Clean lens.
)
”Camera” in 3 Mechanical Section.
Scan Camera
Clean lens.
Clean mirror in front of camera.
)
”Camera” in 3 Mechanical Section.
Camera Illumination
Check movement and brightness.
Operation Switches
Check if all actuators work properly in the Signal I/O screen.
Check emergency stop switch.
Alarm Beacon
Check if all lamps light.
Make sure it is fixed securely.
Hazard Alarm
(continuous high-pitched tone)
Check if alarm sounds.
Warning Alarm
(intermittent high-pitched tone)
Check if alarm sounds.
Cameras
Execute “VISION TEST” and check result.
Pickup Coordinates
Check feeder banks.
Electrodes on Feeder Bank
Check the condition.
)
”Electrodes on Feeder / Feeder Bank” in 4 Electrical Section.
Placement
Make sure components are placed on specified places.
3 Mechanical Section
3-1
3
Mechanical Section
3 Mechanical Section
3-2
Head Manifold Section
Vacuum generator × 6
Silencer element × 6
Solenoid valve ×12
Air filter Assy × 6
Filter element × 6