M6e_ServiceManual_e.pdf - 第62页
3 Mechanical Section 3-28 ■ Application of grease on a Nozzle Holder ACTION: ① Rub the insid e of the Nozzle Holder with materials like a dry cotton swab to cl ean out the grim e, such as old grease. ② Use the head vacuu…
3 Mechanical Section
3-27
■ Lubrication Points for Z-axis Guide / R-axis Spline Shaft
Remove the cover.
Spline shaft
Ball screw
Linear guide
Grease hole
3 Mechanical Section
3-28
■ Application of grease on a Nozzle Holder
ACTION:
① Rub the inside of the Nozzle Holder with materials like a dry cotton swab to clean out the grime, such
as old grease.
② Use the head vacuum breaker to blow out the dust, such as fibers from a cotton swab.
NOTE: The head vacuum breaker can be executed by clicking the button at required head on the window of Main
Menu > Manual Menu > Actuator > On/Off > Head Vacuum.
③ Apply silicon grease evenly on the new cotton swab and rub the inside of the Nozzle Holder softly and
evenly with it.
④ After grease is applied, insert a nozzle and confirm that the nozzle escaping works smoothly.
Nozzle holder
Cotton Swab
3 Mechanical Section
3-29
■ Lubrication Points for MX-20 (Option)