00198605-01_AI_EbS_SST25_Camera_EN.pdf - 第5页

1 Introduction 1.1 Safety Instructions Assembly Instructions E by SIPLACE SST25 Camera Option 03/2018 5 1 Introduction This manual describes the SST25 camera installation on EbySIPLACE® machines. 1.1 Safety Instruction…

4 Assembly Instructions E by SIPLACE SST25 Camera Option 03/2018

Inhaltsverzeichnis

1 Introduction

1.1 Safety Instructions

Assembly Instructions E by SIPLACE SST25 Camera Option 03/2018 5

1 Introduction

This manual describes the SST25 camera installation on EbySIPLACE® machines.

1.1 Safety Instructions

DANGER

Nonobservance of these safety instructions may cause injury to personnel and dam-

age to the machine!

► Please observe the safety instructions in the user manual of the relevant machine

for all work!

1.1.1 Conventions for the Use of Safety Instructions and Symbols

Safety Information

This manual contains notes that must be observed to guarantee your personal safety and to avoid

damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-

lows according to the level of risk:

DANGER

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable

damage to property will occur if this hazard warning is not observed.

WARNING

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable

damage to equipment may occur if these warning instructions are not followed.

CAUTION

Definition

For the purposes of this manual, this indicates that minor injuries or damage to property

may occur if this caution is not observed.

NOTICE

Definition

For the purposes of this manual, this note provides information about the product or indic-

ates a part of the manual that requires particular attention.

Symbols

Example Description

Next This typeface marks controls and interface elements in the software.

► These symbol indicates actions that have to be performed by the operator.

1 Introduction

1.1 Safety Instructions

6 Assembly Instructions E by SIPLACE SST25 Camera Option 03/2018

1.1.2 Safety Instructions for Working with Strong Magnetic Fields

DANGER

Strong permanent magnetic fields

Fatal hazard: persons with active implants (e.g. pacemakers, defibrillators, insulin pumps,

etc.) are at risk from strong permanent magnetic fields inside the machine.

Persons at risk should avoid the immediate vicinity of the machine.

CAUTION

Danger of crushing

Danger of crushing for persons with passive metal implants (e.g. plates, screws).

► Do not reach or lean over into the machine when the covers are open.

► Do not bring any metal objects into the danger area.

CAUTION

Strong permanent magnetic fields

There is a risk that the strong magnetic fields could corrupt data on data media or check

cards.

► Keep sensitive data supports away from the permanent magnets.

1.1.3 Safety Instructions for the Power Supply

DANGER

Hazardous Voltages!

The machine is supplied with 3x400V~ (or 3x204V~ / 3 x 220V~ / 3 x 230V~ / 3 x

380V~ / 3x415V~) ± 5%, 50/60Hz mains voltages.

► Observe the safety instructions in the user manual during all service work!

► Before you start working on the power supply, check it for absence of voltage and ob-

serve the waiting times!

●

This means that some parts of the system carry potentially lethal voltages - even when

switched off at the main power switch.

●

Incorrect handling of the placement system can therefore result in fatal injuries, severe injuries

or considerable damage to equipment.

●

Measurements and maintenance work must always be carried out by appropriately qualified

personnel.

●

Always follow the applicable accident prevention and DIN regulations (particularly DIN EN 60

204, part 1) or the regulations specific to your country.

●

Before starting any maintenance work, switch the machine off at the main switch and discon-

nect it from the main power supply.

●

Always secure the machine against unauthorized reactivation. If these instructions are not fol-

lowed, you may be able to touch live parts, which could result in fatal or severe injuries.

Maintaining, installing or removing assemblies

► End all placement operations on the machine.

► Shut down the Windows operating system correctly, otherwise problems may occur when re-

starting the system or data may be lost.

► Switch off the machine at the main switch.

► Disconnect the machine from the main power supply.

► Switch off the machine and attach warning signs to indicate that service work is in progress.