MTC 2 mit 35mm Trayhöhe.pdf - 第11页
SIPLACE MTC2 2 Assembly instructi ons MTC2 with 35 mm tray height 08/2007 Edition 11 2 Assembly instructions MTC2 with 35 mm tray height 2.1 W orking principle The modification of the MTC 2 ena bles to feed trays to the …
1 Montageanleitung MTC2 mit 35 mm Trayhöhe SIPLACE MTC2
Ausgabe 08/2007
10
1.8 Betrieb des MTC2
: Beladen Sie den MTC2 laut Betriebsanleitung 00193634-xx.
: Stellen Sie ein Tray mit einer Gesamthöhe von 35 mm in der SIPLACE bereit.
: Testen Sie mit einem 35 mm hohen Tray, ob der Twinhead über das Tray fahren kann.
Verschieben Sie deshalb mit der Hand das Portal und den Kopf über das Tray.
Fahren Sie alle 4 Ecken sowie die Diagonale ab, um evtl. etwaige Störkanten festzustellen.
1
Stellen Sie sicher, dass das Tray plan auf dem Träger aufliegt und mit Magneten befestigt ist! 1
1
1
1
1
1
SIPLACE MTC2 2 Assembly instructions MTC2 with 35 mm tray height
08/2007 Edition
11
2 Assembly instructions
MTC2 with 35 mm tray height
2.1 Working principle
The modification of the MTC 2 enables to feed trays to the placment system with a total height
(tray + component) up to 35 mm. 2
According to the total height the trays above have to be removed to provide the space. 2
2
2.2 Requirements
2.3 Scope of delivery
– 1 MTC 2 reconstructed to 35 mm for tower 1
– Assembly instructions MTC 2 with 35 mm tray height (item no: 00195629-xx)
2.4 Necessary tools
Set of hexagon socket spanners 2
2
FMT XL cassettes with max. 6 trays Total of required tray spaces
1 tray with component-height of 35 mm
2 trays with standard-height
4
2
1 tray with component-height of 31,5 mm
3 trays with standard-height
3
3
1 tray with component-height of 19,5 mm
4 trays with standard-height
2
4
1 tray with component-height of 8,5 mm
5 trays standard-heigth
1
5
Hardware:
SIPLACE HF-series with MTC2 - heeling frame
SIPLACE X-series with MTC2 - heeling frame
2 Assembly instructions MTC2 with 35 mm tray height SIPLACE MTC2
08/2007 Edition
12
2.5 Restrictions
– The maximum tray height inclusive component and all tolerances is restricted to 35 mm for
tower 1.
– The minimum tray height inclusive component is 2 mm for usage with standard nozzles for both
towers.
– The cycle-time extends according to the longer Z axis way.
– The performance calculation in SIPLACE Pro can differ from the real performance.
– The MTC2 has to be aligned very exactly to avoid HEAD CRASH!
– The current valid guidelines for the MTC 2 are still to be considered.
– The components must lie correctly in the tray, otherwise there is a risk of HEAD CRASH.
2
The bubble level has to be exactly in the middle, otherwise there is DANGER of HEAD CRASH!2
2
2
2
Bubble level