MTC 2 mit 35mm Trayhöhe.pdf - 第16页
2 Assembly instructi ons MTC2 wi th 35 mm tray height SIPLACE MTC2 08/2007 Edition 16 2.8 O peration of the MTC2 : Load the MTC 2 as described in the manual 00 193634-xx. : Provide a tray with a total height of 35 mm in …
SIPLACE MTC2 2 Assembly instructions MTC2 with 35 mm tray height
08/2007 Edition
15
: Use a 35 mm high tray to check, after the installation, if the Twinhead moves over the tray wi-
thout any contact.
Move the gantry by hand and move the head over the tray.
Move over every edge and over the diagonal to detect possible interfering edges.
2
Make sure that the tray is laying plane on the carrier and is fitted with magnets! 2
2
2
2
2
2
2
2
2
2
2
2
2 Assembly instructions MTC2 with 35 mm tray height SIPLACE MTC2
08/2007 Edition
16
2.8 Operation of the MTC2
: Load the MTC 2 as described in the manual 00193634-xx.
: Provide a tray with a total height of 35 mm in the SIPLACE machine.
: Use the 35 mm high tray to check if the Twinhead moves over the tray without any contact.
Move the gantry by hand and move the head over the tray. Move over every edge and over the
diagonal to detect possible interfering edges.
2
Make sure that the tray is laying plane on the carrier and is fitted with magnets! 2
2
2
2
2
2