00197463-03_SM_CPP_Customer_EN.pdf - 第67页

5 Front plate, star, Z axis and smoothed distributor disc 5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05) Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 67 Fig.102: …

100%1 / 120
5 Front plate, star, Z axis and smoothed distributor disc
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05)
66 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
5.7 Replacing the energy transmission for the stator
[03068842‑xx] (only for heads fromFS05)
Parts, equipment and tools
●
Energy transmission for rotor assembly CPP [03068843‑xx] (without connection cable)
Overview
Fig.100: Energy transmission for stator and connection cable
(front and back)
The "energy transmission for the rotor" is located be-
hind the star in the CPP head.
Preparation
► Remove the head from the machine. For details about removing and fitting the placement
head, refer to the service manual for your machine.
fit the head on the head mount [03056231‑xx].
► Make sure that the component sensor protective cap is fitted.
1.1.3 "Protecting the component sensor" [}8]
Removal (for heads from version 05)
► If required, dismantle the front plate.
5.1 "Replacing the front plate [03061102-xx]" [}35]
► Remove the star.
5.2 "Removing and fitting the star (only for heads from FS05 upwards)" [}43]
► Remove the smoothed distributor disc.
5.3 "Replacing the smoothed distributor disc [03055431-xx]" [}47]
Fig.101: Cover
► Turn the head over.
► Remove the four screws (1) fastening the cover
(2) and remove the cover.
5 Front plate, star, Z axis and smoothed distributor disc
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05)
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 67
Fig.102: Cables and cable ties
► Remove the cable ties(1).
► Unthread the cable as far as the intermediate dis-
tributor2(2) and then unplug the cable.
You may want to mark the position, to make clear
assignment easier later on.
Fig.103: Fastening screws for energy transmission stator
► Remove the five screws(1) fastening the "energy
transmission stator".
While doing so, hold the "energy transmission
stator" firmly so that these do not fall down (see
also the next step).
Fig.104: Removing the energy transmission stator
► Carefully remove the "energy transmission for
stator"(1) from the head.
Unplug the cable(2) for the "energy transmission
for stator".
5 Front plate, star, Z axis and smoothed distributor disc
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05)
68 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Installation
Fig.105: Inserting the energy transmission stator
► Connect the cable(2) to the "energy transmission
stator"(1).
► Carefully fit the "energy transmission for stator"
into the head, together with the cable.
Carefully pull the cable through the opening at
the back of the head.
Fig.106: Fastening screws for energy transmission stator
► Fasten the "energy transmission stator" hand-
tight with five screws(1).
Fig.107: Cables and cable ties
► Run the cables up to the intermediate distributor
2(2) and connect these.
► Fasten the cables with cable ties (1).