TDS_Sonix_954_CRD_ENG.pdf - 第3页
Sonix ® 954 CRD TECHNICAL DATA SHEET 3 www.dct.cleaning Application name Recommended application Recommended temperature Recommended time Capacity per 8 hours Conformal coating removing 40 – 55°C 104 – 131 °F 45 min. 980…
Sonix
®
954 CRD
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The Sonix
®
cleaning systems are a unique ultrasonic
technology developed and manufactured by DCT.
In the past, machines with ultrasonic technology
were used for PCBA, which is no longer used
or recommended due to component sensitivity,
miniaturization, higher rinsing quality
requirements, etc.
We recommend Sonix
®
cleaning systems mainly for
special cleaning applications to eff ectively remove
cured conformal coating.
Exceptionally, they can be used for board cleaning if the
boards are compatible with ultrasonic technology. They are
also suitable for degreasing processes of metal components.
Sonix
®
954 CRD “Piano” including 100% closed loop with
processes of cleaning, rinsing, and drying technologies.
All processes are fully automated and take place in one
process chamber, under which 2 storage tanks are placed,
one with cleaning liquid and the other with rinsing liquid.
The operator places the parts to be cleaned in the
process chamber in the basket, and the cleaning system
automatically performs the cleaning, rinsing and drying
process.
Sonix
®
954 CRD “Piano” is designed for removing cured
conformal coatings from coating frames, coating machine
parts or coated PCBs for repair and subsequent coating.
In certain cases,Sonix
®
954 CRD “Piano” may also be
recommended for PCB cleaning or for degreasing of metal
components.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
Sonix
®
954 CRD
TECHNICAL DATA SHEET
3
www.dct.cleaning
Application
name
Recommended
application
Recommended
temperature
Recommended
time
Capacity
per 8 hours
Conformal coating removing
40 – 55°C 104 – 131 °F 45 min. 980 ** / 144 ***
PCB
35 – 55°C 95 – 131 °F 35 min. 1261 **
3 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
C
CLEANING
RINSING
DRYING
R
D
R
D
C
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND:
Sonix
®
954 CRD
TECHNICAL DATA SHEET
4
www.dct.cleaning
Dimensions (w x l x h) 2350 x 1180 x 2150 mm 92.5 x 46.5 x 67.3 in
Weight 680 kg 1499 lbs
Ø energy consumption per cycle 1,92 kWh 1.92 kWh
Cleaning and rinsing uid consumption
per cycle
0,05 – 0,3 l 0.01 – 0.08 gal
Compressed air consumption per cycle 83 l / 5 Bar 21.9 gal / 72.5 PSI
Dimensions of carrier basket 750 x 375 x 350 mm 29.53 x 14,7 x 13,7 in
Max. dimensions of the cleaned parts 800 x 400 x 350 mm 31,5 x 15,7 x 13,7 in
Temperature range setting of
the cleaning and rinsing uid
From ambient temperature to 60°C From ambient temperature to 140°F
Ultrasound frequency 35 kHz 35 kHz
Temperature range setting of the drying From ambient temperature to 80°C From ambient temperature to 176°F
Noise level < 70 dB < 70 dB
Device control PLC + 8,4“ touchscreen PLC + 8.4“ touchscreen
Volume of the storage tanks 200 l 52,8 gal
TECHNICAL PARAMETERS
DIMENSIONS
MINIMUM SERVICE SPACE
AROUND THE MACHINE
1180 mm
46.5 in
1710 mm
67.3 in
2350 mm
92.5 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
metric units imperial units