00194923-01_OIS_DB.pdf - 第19页
OIS Datenbank Version 4.1 Schnittstellenbeschreibung OIS Database Version 4.1 Interface Description 19 von 47 26 OIS_MAINTENACE Manual input, planned maintenance 0 0 0 0 0 100 100 1 27 OIS_SETUP Manual input, setting up …
Schnittstellenbeschreibung OIS Datenbank Version 4.1
Interface Description OIS Database Version 4.1
18 von 47
6 Appendix
6.1 Time slices
The configuration of time slices is described below. A time slice is a combination of states of a placement
machine. A state can be assigned to a time slice from 0% to 100%. The time slice can be freely defined by
the customer.
The following setting (table) is supplied as the SIPLACE standard. This table corresponds to the assignment
of states to time slices (shares of time) in MaDaMaS.
MaDaMaS shares of time: T
1
= running; T
2
= waiting; T
3
= blocked; T
4
= interrupted;
T
5
= fault; T
6
– T
8
= not used
Available /s of time: T
a
= technical availability, manufacturer responsibility
T
b
= allocation time (on-period)
Displayed state: T
9
= state display in the "States" view table.
0 = not displayed; 1 = displayed.
No. State Description T
1
T
2
T
3
T
4
T
5
T
a
T
b
T
9
1 OIS_PCB_BEGIN ||
OIS_PCB_BEGIN2
Start PCB production 100 0 0 0 0 100 100 0
2 OIS_PCB_END ||
OIS_PCB_END2
End PCB production 0 100 0 0 0 100 100 0
3 OIS_BREAK_BEGIN
A
bort, production interrupted 0 0 0 100 0 100 100 0
4 OIS_EMERGENCY_STOP EMERGENCY STOP button was pressed 0 0 0 100 0 100 100 1
5 OIS_AIR Compressed air supply malfunction 0 0 0 0 100 100 100 1
6 OIS_STOP Stop button was pressed 0 0 0 100 0 100 100 0
9 OIS_WAIT_PCB_IN Waiting for PCB in input conveyor 0 100 0 0 0 100 100 0
10 OIS_WAIT_PCB_INSIDE Waiting for PCB in center conveyor 100 0 0 0 0 100 100 0
11 OIS_WAIT_PCB_OUT Waiting for output conveyor to become free 0 0 100 0 0 100 100 0
12 OIS_WAIT_DATA Waiting until data has been sent 0 100 0 0 0 100 100 0
14 OIS_FIDUCIAL_ERROR
A
fiducial was not recognized 0 0 0 0 100 100 100 0
15 OIS_TRACK_ERROR Track empty 0 0 0 0 100 100 100 0
16 OIS_MACHINE_ERROR Fatal machine error has occurred 0 0 0 0 100 0 100 1
17 OIS_TRANSPORT_ERROR Fatal transport error has occurred 0 0 0 0 100 100 100 0
18 OIS_BARCODE_ERROR Fatal barcode error has occurred 0 0 0 0 100 100 100 0
20 OIS_HEAD_STEP Cycle mode active 0 0 0 100 0 100 100 1
21 OIS_KEY_SLOW Key switch on slow 0 0 0 100 0 100 100 1
22 OIS_VISION_BEGIN Vision system active 0 0 0 100 0 100 100 0
23 OIS_FUNCTION Single functions active 0 0 0 100 0 100 100 0
24 OIS_INIT Placement machine is initializing 0 0 0 100 0 100 100 0
25 OIS_HOLIDAY Manual input, vacation 0 0 0 0 0 100 100 1
OIS Datenbank Version 4.1 Schnittstellenbeschreibung
OIS Database Version 4.1 Interface Description
19 von 47
26 OIS_MAINTENACE Manual input, planned maintenance 0 0 0 0 0 100 100 1
27 OIS_SETUP Manual input, setting up machines 0 0 0 0 0 100 100 1
28 OIS_DOWN_PLAN Manual input, planned downtime 0 0 0 0 0 100 100 1
29 OIS_DOWN_ILL Manual input, unplanned downtime 0 0 0 0 0 100 100 1
30 OIS_PROTOTYPE Manual input, product move 0 0 0 0 0 100 100 1
Configuration of shares of time
A customer can save a time model centrally in the database. This customer configuration is shown in the
following tables:
• STATE
• STATESHARE
The customer configuration can be accessed via these views
6.2 OIS relevant machine error messages
16 Seg. not airtight
28 The nozzle in the reject position is contaminated
43 Component not at nozzle after pick-up
44 Component not at nozzle before placement
48 Results of vacuum measurement of pick-up and reject station reversed
103 Pitch of a lead group outside tolerance
121 Lead tip: No result
203 Track deactivated by operator
272 No measurement from vision system.
398 Coplanarity: Row not available
403 Coplanarity: Too many leads measured
455 Component not on nozzle during placement
486 Coplanarity: Component outside measuring range
487 Coplanarity: Lead missing or row not measured correctly
488 Coplanarity: Measuring on one lead finished
489 Coplanarity: Lead outside position tolerance
490 Coplan.: Placement level not found
499 Lead tip: component outside tolerance
500 Lead tip: evaluation not possible
503 Waffle pack tray is empty.
2000 Component outside feed tolerance
2001 Component outside feed tolerance (Size)
2002 Component outside feed tolerance (Row)
2003 Component outside feed tolerance (Corner)
2004 Component outside feed tolerance (Lead)
Schnittstellenbeschreibung OIS Datenbank Version 4.1
Interface Description OIS Database Version 4.1
20 von 47
2005 Component outside feed tolerance (Grid)
2006 Component outside feed tolerance (Ball)
2007 Component outside feed tolerance
2008 Component outside feed tolerance (Size)
2009 Component outside feed tolerance (Row)
2010 Component outside feed tolerance (Corner)
2011 Component outside feed tolerance (Lead)
2012 Component outside feed tolerance (Grid)
2013 Component outside feed tolerance (Ball)
2014 Quality too low during optical centering
2015 Quality too low during optical centering (Size)
2016 Quality too low during optical centering (Row)
2017 Quality too low during optical centering (Corner)
2018 Quality too low during optical centering (Lead)
2019 Quality too low during optical centering (Grid)
2020 Quality too low during optical centering (Ball)
2021 Component length outside tolerance
2022 Component length outside tolerance (Size)
2023 Component length outside tolerance (Row)
2024 Component length outside tolerance (Corner)
2025 Component length outside tolerance (Lead)
2026 Component length outside tolerance (Grid)
2027 Component length outside tolerance (Ball)
2028 Component width outside tolerance
2029 Component width outside tolerance (Size)
2030 Component width outside tolerance (Row)
2031 Component width outside tolerance (Corner)
2032 Component width outside tolerance (Lead)
2033 Component width outside tolerance (Grid)
2034 Component width outside tolerance (Ball)
2035 Number of leads on component not correct. Inaccurate calibration
2036 Number of leads on component not correct (Corner)
2037 Number of leads on component not correct (Lead)
2038 Orthogonality error during component measuring
2039 Orthogonality error during component measuring (Corner)
2040 Orthogonality error during component measuring (Lead)
2041 Component angle outside tolerance
2042 Component angle outside tolerance (Size)
2043 Component angle outside tolerance (Row)
2044 Component angle outside tolerance (Corner)