Smart Feeder 16 mm E - Removing and Fitting the Foil Rocker Assembly.pdf - 第3页

E-by SIPLACE Smart Feeder 16 mm E Foil Rocker As sembly Part Exchange T1 – Phillips Screwdriver 0.6 Nm T2 – TORX Screwdriver 0.6 Nm, size T8

All names identified by ® are registered trademarks of ASM Assembly Systems Singapore Pte Ltd. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could

violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information

in this publication is reviewed regularly and any necessary connections are included in subsequent editions.

ASM Assembly Systems Singapore Pte Ltd

535 Yishun Industrial Park A

ASM Tech-Park Building 2

Singapore 768775

Item no.:

www.e-by-siplace.com Printed by ASM Assembly Systems

E-by SIPLACE Smart Feeder 16 mm E Foil Rocker Assembly

Part Exchange

T1 – Phillips Screwdriver 0.6 Nm T2 – TORX Screwdriver 0.6 Nm, size T8

E-by SIPLACE Smart Feeder

16 mm E

Removing the Foil Rocker Assembly

Part Exchange

1/2

CAUTION! Refer to safety instructions in user manual before working on the machine.

ESD guidelines are to be followed

Tool:

T1,T2

Wear Part: Consumables:

1. Place the feeder module with the right side

down on a surface.

2. Loosen the screws, Blue Circles with T1

and Red Circles with T2.

3. Notice: Separate the screws.

4. Loosen the two screws with T2 and pull the

rocker foil up.

5. Pull out the cable.