Anleitung X2 SP 1 und 3.pdf - 第19页
Special Design 2 Assembly instructions Special des ign for manual tray on X2 at location 1 or 3 04/2007 Edition 19 : T urn the nozzle chan ger around and disconnect the air hose and the cable, then remove the nozzle chan…
2 Assembly instructions Special design for manual tray on X2 at location 1 or 3 Special Design
04/2007 Edition
18
2.7 Hardware installation
: Dock the component trolleys out of the affected locations.
: Shut down the machine and switch it off at the main switch.
2.7.1 Installation of the arbitrary tray carrier at setup area 1 or 3 at nozzle changer
position 2
: Remove the 4 screws.
2
2
2
2
2
2
2
2
Four screws
Special Design 2 Assembly instructions Special design for manual tray on X2 at location 1 or 3
04/2007 Edition
19
: Turn the nozzle changer around and disconnect the air hose and the cable, then remove the
nozzle changer.
: The disconnected air hose has to be sealed properly.
: Secure cables and hoses inside the machine.
2
2
2
2
2
2
2
2
2
2
2
Cable
Air hose
2 Assembly instructions Special design for manual tray on X2 at location 1 or 3 Special Design
04/2007 Edition
20
: If no second nozzle changer is present, mount the carrier for the second nozzle changer first.
2
2
2
2
2
2
2
2
2
2
2
2