dispensers-brochure.pdf - 第5页
8 9 MYD s e r i e s K e y feat u res DUAL L ANE CONVEY ORS Du al la ne h elp i n maxim izing your p roduc tion l ine an d optimizing th roug hpu t. T wo diff e rent jo bs ca n run on each line. CONFIGURABLE C ONVEY OR ST …
76
MYD Series Core Components
Highest Throughput, lowest
cost of ownership
UNIQUE CAPABILITIES
The MYD jet valves and pumps can produce high
drop velocity, allowing a wide range of fl uids and
applications.
It is easy to change the drop velocity to fi ne tune
the dispensing process and achieve a high process
capability.
PRECISE CONTROLS
Closed loop controls and system feedback are key for
higher yields. Focus on smart jetting controls, closed
loop substrate heating, user specifi ed temperature
spot checks and closed loop material dispense are
the foundation of quality output.
SIMPLE MAINTENANCE
The MYD jet valves are designed with simplicity and
ease of use in mind. Minimal disassembly required
and wear parts are easily replaced.
Diff erent types of jet valves provide wide range of capabilities to optimize
your process based on your specifi c materials. For large fl ow applications,
auger valves and positive displacement pumps decrease cycle time while
maintaining tight process controls. All jets, valves and pumps are designed
with speed, durability and precision in mind.
8 9
MYD series
Key features
DUAL LANE CONVEYORS
Dual lane help in maximizing your production line
and optimizing throughput. Two diff erent jobs can
run on each line.
CONFIGURABLE CONVEYOR STATIONS
Edge clamps, vacuum blocks, vacuum heating and
non-contact heating modules off er all the potential
material handling options for eff cient dispensing
TILT OPTIONS
Pneumatic and electrical tilt and rotate options enable precise
material dispense in diffi cult to reach locations. Individual angle
off sets are programmed for precise dispensing.
DUAL VALVE CONFIGURATIONS
Synchronous dual valve; two heads work at the same
time to save cycle time and improve productivity.
Asynchronous dual valve; two heads work at diff erent
time. Diff erent materials can be used on each valve.
TEMPERATURE SPOT CHECK
User programmable location where exact
temperature is measured and verifi ed with
programmable go/no-go logic.
AUTOMATIC VISUAL INSPECTION
AVI, automatic visual inspection, improves inspection quality and
helps automate the production line. The AVI can be setto warn, fl ag
and log production results increasing yield traceability and visibility.
10 11
MYD10/MYD10I in-line
Specification
MYD50 in-line
Specification
FACILITY REQUIREMENT MYD50
Power 220 V, 2 KW, 10 A, 60 Hz
Air supply 90psi(6bar)
System dimention(W*D*H) 770*1260*1450mm
System weight 900KG
Standard compliance CE
MOTION SYSTEM
Positioning accuracy
XY: ±25um@3σ Z:±10um@3σ
XYZ Repeatability
XY: ±10um@3σ Z:±5um@3σ
Max speed 1300mm/s(XY)
Acceleration 1.3g
Resolution 640*480 px (30w)
Drive system Linear motor
BOARD HANDLING
Conveyor type Belt
Tool payload capacity 3KG
Min. board/carrier width 50mm
Max. board/carrier width 500mm
Min. board/carrier length 50mm
Max. board/carrier length 350
Operating system Windows 7
Board thinckness range 0.5-0.6mm
Communication protocol SMEMA
DISPENSE AREA
Single lane 350*500mm
Dual lane 350*215mm
STANDARD FEATURES OPTIONAL FEATURES
Single lane Dual lane
Vison module Non-contact heating module
Vacuum cleaning Vaccum absorbtion platform
CCD vision system
Dual valve module
Audible alarm Low fluid level sensor
Nozzle heating Tilt and rotate
Supports 30 cc / 50 cc syringe Electronic scale
Dispensing software Automatic needle calibration
X, Y, Z fiducial calibration platform Barcode reading function module (with camera)
IPC Barcode reading function module (with barcode reader)
Left-right. Right-left conveyor Laser height detecting module (30 ± 4mm)
Jet valve
Temperature spot check
MYD10 MYD10I
220 V, 2 KW, 10 A, 60 Hz 220 V, 2 KW, 10 A, 60 Hz
90psi(6bar) 90 psi(6bar)
770*1200*1400mm 890*1500*1500mm
650KG 750KG
CE CE
XY: ±30um@3σ Z:±10um@3σ XY: ±30um@3σ Z:±10um@3σ
XY: ±15um@3σ Z:±5um@3σ XY: ±15um@3σ Z:±5um@3σ
1000mm/s (X,Y) 1000mm/s (X,Y)
1.0g 1.0g
640*480 px (30w) 640*480 px (30w)
AC servo AC servo
Belt Belt
3 kg 3 kg
50mm 50mm
475mm 475mm
50mm 50mm
350mm 350mm
Windows 7 Windows 7
0.5~6mm 0.5~6mm
SMEMA SMEMA
350* 475mm 440* 760mm
350* 210mm 440* 350mm
STANDARD FEATURES OPTIONAL FEATURES
Single lane Dual lane
Vison module Non-contact heating module
Vacuum cleaning Vaccum absorbtion platform
CCD vision system
Dual valve module
Audible alarm Low fluid level sensor
Nozzle heating Tilt and rotate
Supports 30 cc / 50 cc syringe Electronic scale
Dispensing software Automatic needle calibration
X, Y, Z fiducial calibration platform Barcode reading function module (with camera)
IPC Barcode reading function module (with barcode reader)
Left-right. Right-left conveyor Laser height detecting module (30 ± 4 mm)
Jet valve
Temperature spot check