dispensers-brochure.pdf - 第6页
10 11 MY D 10 /MY D 10 I in-l i ne Spec ification M Y D5 0 in - lin e Spec ification F A CIL ITY RE QUIREMENT MYD50 Powe r 2 20 V , 2 K W, 10 A , 60 H z Air s up ply 9 0 p s i (6 b a r) S ystem dimention( W* D*H) 770*1260*…
8 9
MYD series
Key features
DUAL LANE CONVEYORS
Dual lane help in maximizing your production line
and optimizing throughput. Two diff erent jobs can
run on each line.
CONFIGURABLE CONVEYOR STATIONS
Edge clamps, vacuum blocks, vacuum heating and
non-contact heating modules off er all the potential
material handling options for eff cient dispensing
TILT OPTIONS
Pneumatic and electrical tilt and rotate options enable precise
material dispense in diffi cult to reach locations. Individual angle
off sets are programmed for precise dispensing.
DUAL VALVE CONFIGURATIONS
Synchronous dual valve; two heads work at the same
time to save cycle time and improve productivity.
Asynchronous dual valve; two heads work at diff erent
time. Diff erent materials can be used on each valve.
TEMPERATURE SPOT CHECK
User programmable location where exact
temperature is measured and verifi ed with
programmable go/no-go logic.
AUTOMATIC VISUAL INSPECTION
AVI, automatic visual inspection, improves inspection quality and
helps automate the production line. The AVI can be setto warn, fl ag
and log production results increasing yield traceability and visibility.
10 11
MYD10/MYD10I in-line
Specification
MYD50 in-line
Specification
FACILITY REQUIREMENT MYD50
Power 220 V, 2 KW, 10 A, 60 Hz
Air supply 90psi(6bar)
System dimention(W*D*H) 770*1260*1450mm
System weight 900KG
Standard compliance CE
MOTION SYSTEM
Positioning accuracy
XY: ±25um@3σ Z:±10um@3σ
XYZ Repeatability
XY: ±10um@3σ Z:±5um@3σ
Max speed 1300mm/s(XY)
Acceleration 1.3g
Resolution 640*480 px (30w)
Drive system Linear motor
BOARD HANDLING
Conveyor type Belt
Tool payload capacity 3KG
Min. board/carrier width 50mm
Max. board/carrier width 500mm
Min. board/carrier length 50mm
Max. board/carrier length 350
Operating system Windows 7
Board thinckness range 0.5-0.6mm
Communication protocol SMEMA
DISPENSE AREA
Single lane 350*500mm
Dual lane 350*215mm
STANDARD FEATURES OPTIONAL FEATURES
Single lane Dual lane
Vison module Non-contact heating module
Vacuum cleaning Vaccum absorbtion platform
CCD vision system
Dual valve module
Audible alarm Low fluid level sensor
Nozzle heating Tilt and rotate
Supports 30 cc / 50 cc syringe Electronic scale
Dispensing software Automatic needle calibration
X, Y, Z fiducial calibration platform Barcode reading function module (with camera)
IPC Barcode reading function module (with barcode reader)
Left-right. Right-left conveyor Laser height detecting module (30 ± 4mm)
Jet valve
Temperature spot check
MYD10 MYD10I
220 V, 2 KW, 10 A, 60 Hz 220 V, 2 KW, 10 A, 60 Hz
90psi(6bar) 90 psi(6bar)
770*1200*1400mm 890*1500*1500mm
650KG 750KG
CE CE
XY: ±30um@3σ Z:±10um@3σ XY: ±30um@3σ Z:±10um@3σ
XY: ±15um@3σ Z:±5um@3σ XY: ±15um@3σ Z:±5um@3σ
1000mm/s (X,Y) 1000mm/s (X,Y)
1.0g 1.0g
640*480 px (30w) 640*480 px (30w)
AC servo AC servo
Belt Belt
3 kg 3 kg
50mm 50mm
475mm 475mm
50mm 50mm
350mm 350mm
Windows 7 Windows 7
0.5~6mm 0.5~6mm
SMEMA SMEMA
350* 475mm 440* 760mm
350* 210mm 440* 350mm
STANDARD FEATURES OPTIONAL FEATURES
Single lane Dual lane
Vison module Non-contact heating module
Vacuum cleaning Vaccum absorbtion platform
CCD vision system
Dual valve module
Audible alarm Low fluid level sensor
Nozzle heating Tilt and rotate
Supports 30 cc / 50 cc syringe Electronic scale
Dispensing software Automatic needle calibration
X, Y, Z fiducial calibration platform Barcode reading function module (with camera)
IPC Barcode reading function module (with barcode reader)
Left-right. Right-left conveyor Laser height detecting module (30 ± 4 mm)
Jet valve
Temperature spot check
12
4012648 Rev 0004 / October 2019
NETHERLANDS
Mycronic B.V.
High Tech Campus 10
5656 AE
Eindhoven
Netherlands
Tel: +31 402 62 06 67
SINGAPORE
Mycronic Pte., Ltd.
9 Tagore Lane, #02-08/09
9@Tagore
Singapore 787472
Tel: +65 6281 7997
SOUTH KOREA
Mycronic Co. Ltd.
3rd Floor, Jung-San
Bldg. 1026-8
Sanbon-Dong, Gunpo-Si
Gyeonggi-Do, 15808
South Korea
Tel: +82 31 387 5111
UK
Mycronic Ltd.
Unit 2, Concept Park
Innovation Close
Poole, Dorset, BH12 4QT
UK
Tel: +44 1202 723 585
USA
Mycronic Inc.
320 Newburyport Turnpike
Rowley, MA 01969
USA
Tel: +1 978 948 6919
mycronic.com
SWEDEN
Mycronic AB
PO Box 3141
Nytorpsvägen 9
SE-183 03 Täby
Sweden
Tel: +46 8 638 52 00
CHINA
Mycronic Co., Ltd.
Unit 106, E Block
Lane 168, Da Duhe Road.
Putuo District, 200062
Shanghai P.R. China
Tel: +86 21 3252 3785/86
FRANCE
Mycronic S.A.S.
1 rue de Traversière - CS 80045
94513 Rungis Cedex 1
France
Tel: +33 1 41 80 15 80
GERMANY
Mycronic GmbH
Biberger Straße 93
D-82008 Unterhaching bei München
Germany
Tel: +49 89 4524248-0
JAPAN
Mycronic Technologies KK
Chofu Center Bldg.
1-18-1 Chofugaoka, Chofu-shi
Tokyo 182-0021
Japan
Tel: +81 42 433 9400
Specifications are subject to change without notice.
Mycronic, MYDATA, MYDATA automation and MY; Mycronic 4.0; MYPro, MY100, MY100DX, MY100SX, MY100LX, MY100e, MY100HXe, MY100DXe, MY100SXe, MY100LXe, MY200,
MY200HX, MY200DX, MY200SX, MY200LX, MY300, MY300DX, MY300SX, MY300LX, MY500, MY600, MY600JD, MY600JP, MY600JX, MY700, MY700JD, MY700JP, MY700JX and
MYSynergy; Mycronic 4.0; MYSmart, MYC50, MYD10, MYD50, MYT10, MYT50; T3, T4, T5 and T6; HYDRA Speedmount, Midas, ISIC; Agilis, Agilis Linear Magazine (ALM), Agilis Linear
Magazine Flex (ALM FLEX), Agilis Stick Magazine (ASM), Agilis Tray Magazine (ATM), Mycronic Tray Exchanger (TEX), Mycronic Tape Magazine (TM), Mycronic Tray Wagon Magazine
(TWM); Mycronic Dip Unit (DPU); Mycronic SMD Tower; Mycronic Standard Vision System (SVS), Mycronic Dual Vision System (DVS), Mycronic Linescan Vision System (LVS), Mycronic
HYDRA Vision System (HVS); Mycronic Assembly Process Management (APM) including; JPSys, TPSys, MYLabel, MYPlan, MYCenter, MYTrace, MYCam, FlowLine and Cad Conversion
are registered trademarks or trademarks of Mycronic AB. Mycronic AB is ISO 9001:2015 and ISO 14001:2015 certified.