TDS_InJet_388_TWIN_CRRD_ENG.pdf - 第3页

InJet ® 388 TWIN CRRD Sausage dog TECHNICAL DATA SHEET 3 www.dct.cleaning C R R Application name Recommended application Recommended temperature Total cleaning process time Capacity per 8 hours Stencil, misprint, squeege…

100%1 / 8
InJet
®
388 TWIN CRRD  Sausage dog
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The InJet 388 series cleaning systems represent
unique vertical Spray-In-Air technology developed
and manufactured by DCT.
The vertically installed Spray-In-Air device minimizes the
shadowing eff ect commonly seen in horizontal cleaners,
and maximizes the effi ciency of the cleaning process as
the cleaning  uid is sprayed directly onto the cleaned
component.
The InJet
®
388 TWIN CRRD “Sausage dog” including 100%
closed loop with processes of cleaning, pre-rinsing,  nal
rinsing, and drying technologies. All of the processes are
fully automated, and take place in 3 process chambers.
Cleaning takes place in the  rst inlet chamber, after which
the cleaned part is automatically transported to the central
passage chamber where the  rst rinsing process takes
place. The third, and last, outlet chamber is designed for
the  nal rinsing and the drying process.
Both chambers (inlet and outlet) can be used
simultaneously, which increases system capacity and
reduces cross-contamination compared to single-chamber
systems.
The InJet
®
388 TWIN CRRD “Sausage dog” is developed
primarily for high-capacity and precision PCBA.
The cleaning system can also be used for the high-capacity
removal of solder pastes and SMT adhesives from stencils,
PumPrints, squeegees and misprints.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
InJet
®
388 TWIN CRRD  Sausage dog
TECHNICAL DATA SHEET
3
www.dct.cleaning
C
R
R
Application
name
Recommended
application
Recommended
temperature
Total cleaning
process time
Capacity
per 8 hours
Stencil, misprint, squeegee
20 – 40°C 68 – 104 °F 18 min. 48
PumPrint
40 – 55°C 104 – 131 °F 18 min. 48
PCB
35 – 55°C 95 – 131 °F 30 min. 768 *
4 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
C
R
D
R
CLEANING
PRE–RINSING
RINSING
DRYING
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND:
InJet
®
388 TWIN CRRD  Sausage dog
TECHNICAL DATA SHEET
4
www.dct.cleaning
TECHNICAL PARAMETERS
DIMENSIONS
MINIMUM SERVICE SPACE
AROUND THE MACHINE
1830 mm
72 in
2150 mm
84.6 in
2500 mm
98.4 in
1200 mm
47.2 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
open door
450 mm
17.7 in
open door
450 mm
17.7 in
metric units imperial units
Dimensions (w x l x h) 1200 x 2500 x 2150* mm 47.2 x 98.4 x 84,6* in
Weight 800 kg 1764 lbs
Ø energy consumption per cycle 1,54 kWh 1.54 kWh
Cleaning and rinsing  uid consumption
per cycle
0,05 – 0,3 l 0.01 – 0.08 gal
Compressed air consumption per cycle 1 l / 5 Bar 0.26 gal / 72.5 PSI
Max. dimensions of the cleaned parts 100 x 810 x 740 mm 3.93 x 31.89 x 29.13 in
Exchangeable mechanical  lter of cleaning
and rinsing  uid
5 – 200 μm 5 – 200 μm
Spraying pressure / 45°C / 113°F 2,3 Bar 33.36 PSI
Range pressure – cleaning / 45°C/ 113°F 0,7 – 3 Bar** 10.15 – 45.51 PSI
Range pressure – pre rinsing / 45°C / 113°F 0,8 – 2 Bar** 11.6 – 29.1 PSI
Range pressure – rinsing / 45°C / 113°F 0,1 – 2,8 Bar** 1.45 – 40.61 PSI
Cleaning  uid  ow rate 200 l / min 33 gal / min
Temperature range setting of the cleaning
and rinsing  uid
From ambient temperature to 60°C From ambient temperature to 140°F
Conductivity range settings of the rinsing
uid in the tanks.
0 – 2000 μS/cm * optional 0 – 2000 μS/cm * optional
Temperature range setting of the drying From ambient temperature to 80°C From ambient temperature to 176°F
Noise level < 70 dB < 70 dB
Device control PLC + 8,4“ touchscreen PLC + 8.4“ touchscreen
Volume of the storage tanks 80 l 21.1 gal
* Maximum dimension in operation condition
** Values may vary depending on equipment ( lters, pums)