00193853-01.pdf - 第21页
Retrofit instructions S IPLACE S-27 HM L ong Board Option 10/2004 Edition 21 : Install the l ifting table bed o ption. : Use 2x M5x40 DI N912 to s crew the s upport b racket in the des ired posi tion on t he lifting ta b…
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
20
: Raise the lifting table mechanism manually, otherwise you will not be able to fit the lifting table
bed.
2
Fix this position with an installation aid that should be removed once the lifting table bed is in-
stalled. 2
2
: Reconnect the air hoses.
: Plug the option plug into the conversion board.
2
2
2
2
2
2
X 36
X 36kt
X 37k
t
X 35kt
X 34kt
X 34kt
X 35kt
X 36kt
X 37k
t
X 36
X 37
Conversion board, assembly tray
(kt) 00359426-xx
Conversion board, assembly tray
(kt) 00359426-xx
Single conveyor
Coding plug
00371258-xx
Dual conveyor
Coding plug
00371258-xx
X36kt / X37kt
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
21
: Install the lifting table bed option.
: Use 2x M5x40 DIN912 to screw the support bracket in the desired position on the lifting table
bed .
: Bring the support rail into the desired position and tighten the screws.
2
2
2
2
2
"Long board"
support
LT path limiter
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
22
2.5 Installation of software
: Install the software "Long Board Option SIPLACE S-25 HM / S-27 HM
(Item no.: 00118405-xx).
2.6 Settings in SITEST
: Start the SITEST Service Menu.
: Choose PCB transport menu.
: Select "Change transport mode".
2
2
2
2
2
Change transport mode