00194702_SIPLACE Trace Config Assistant Setup Center RF.pdf - 第15页

Installation Manual – SIPLACE Trace Config Assistant SIPLACE Setup Center RF 2.1 - Tools Step 4: Feeder Pitch In this step you can update the feeder pitch of the selected comp onents from Step 2. You can select to reset …

100%1 / 20
SIPLACE Setup Center RF 2.1 - Tools Installation Manual – SIPLACE Trace Config Assistant
Step 3: Verification Mode
In this step you can select the verification mode settings for the components selected in the last step.
“Without forced verification” will clear the “Validate” flag in SIPLACE Pro, “With Forced Verification” will
set it. In addition to this you can set the traceability and splice detection flags.
Figure 6 "Verification Mode" page
These settings are relevant if you use the SIPLACE Component Level indicator and
Traceability options on the stations.
14 von 20
Installation Manual – SIPLACE Trace Config Assistant SIPLACE Setup Center RF 2.1 - Tools
Step 4: Feeder Pitch
In this step you can update the feeder pitch of the selected components from Step 2.
You can select to reset the values, to update new ones or to update all components.
The Feeder Pitch is calculated from the component size and its pickup angle. In a few cases the
calculation may differ from the actual value and needs to be adjusted manually in SIPLACE Pro.
The feeder pitch is used to determine the component threshold for the remaining length of a reel.
Figure 7 "Feeder Pitch" page
These settings are relevant if you use the SIPLACE Component Level indicator and
Traceability options on the stations.
15 von 20
-
SIPLACE Setup Center RF 2.1 - Tools Installation Manual – SIPLACE Trace Config Assistant
Step 5: Update Setups / Stations
In this step you can update all Setups with the component barcode reader.
Options are to enter no barcode reader, the wired station scanner or SIPLACE Mobile Verifier. Latter is
used by SIPLACE Setup Center RF.
Figure 8 "Update Setups / Stations" page
These settings are relevant if you use the SIPLACE Component Level indicator and
Traceability options on the stations.
16 von 20