Techcon2019_MSTR_f.pdf - 第18页

16 www.techcon.com www.techcon.com www.techcon.com TS50 0 0DM P-DCX Ro tary M icro v al ve K ey F eat ures •   Preciseandconsist entshotsizes •  Motorre v ersecapability •   Fieldreplaceablew ettedparts …

100%1 / 40
www.techcon.com
www.techcon.com www.techcon.com
15
TS8100
PC Pump
TS8100
Positive Displacement
PC Pump
The TS8100 Series Positive Displacement Pump is a continu-
ously volumetric dispense pump based on Progressive Cavity
(PC) technology. The pump is designed to dispense a wide
range of fluids, from low viscosity coatings to high viscosity
greases.
Techcon’s PC Pump uses a special stator and rotor design to
provide consistent dispensing output.
The turning rotor moves the fluid in tightly sealed cavities
through the stator’s fluid chambers to create a volumetric fluid
flow that does not change the shape or size of the fluid. Due
to the PC Pump’s unique dispensing technology, accuracy and
repeatability of ±1%isachievable.
Key Features
• Volumetric,positivedisplacement
• Accurateandrepeatableupto
±1%
• Nodrippingwithanyviscosityuid
• Compatiblewithabrasivematerials
• Doesnotdamageorbreakllers
• Easytoclean
Typical Applications
Under filling PCBA components, Encapsula-
tion and Potting applications, Applying lubri-
cation on Automotive parts, Dispensing pastes
and flux
Specifications
Size 8.07" (205mm) L x 1.3" (34mm) W
Weight 13.4 oz. (380g)
Wetted Part Delrin
®
(Acetal), PFE, Stainless Steel, UHMWPE
Fluid viscosity 1-300K (Cps or m.Pa.s)
Precision, absolute (1)
±1%
Self-sealing (2) 2 bar
Material inlet port 1/8 NPT
Material outlet port Male Luer lock
Direct mount material reservoir 3 to 55cc
Part number TS8100-100 TS8100-200 TS8100-300
Dispense volume per rotation 0.012 ml average 0.047 ml average 0.07 ml average
Flow rate range 0.15 – 1.04
ml/min.
0.47 – 4.46
ml/min.
0.74 – 6.7
ml/min.
Max ow rate recommended (3) 0.65 ml/min. 3.38 ml/min. 5.06 ml/min.
Minimum dispense amount 0.001 ml 0.0045 ml 0.0068 ml
(1) Volumetric dispensing as absolute deviation per complete revolution and also depends on dispensing uid.
(2) For uid with viscosity of 1000 Cps or lower. The pump can handle up to 5.5 bar for 300K Cps viscosity uid.
(3) This is the maximum ow rate that does not shorten the stator work life
Accessories
XYZ Robot: Techcon’s Bench-Top Dispensing Robots makes it
easy to automate uid dispensing.
Fluid reservoirs: The pump can be fed from the TS1254 (1.8 litre)
or TS1258 (5 litre) Pressure Tank, or from any size syringe barrel
or cartridge.
Digital Controller: Techcon’s TS580R Digital Controller is
designed specically for the TS8100 PC Pump.
Motor
Syringe Bracket
Rotor
Stator
Luer Taper
& Cap
Fluid Inlet
Collar
16
www.techcon.com
www.techcon.com www.techcon.com
TS5000DMP-DCX
Rotary Microvalve
Key Features
• Preciseandconsistentshotsizes
• Motorreversecapability
• Fieldreplaceablewettedparts
• Adjustabledispenserate
• Closed-loopmotorcontrolwithencoderfeedback
(encoder version)
TS5000DMP - Performing underfill
Specifications - TS5000DMP-DCX
Size (Imperial) 1.56" W x 3.56" L x 5.88" H
Size (Metric) 39.6mm x 90.4mm x 149.4mm
Weight 0.73 lb. (331 g)
Fluid Inlet Luer Lock female
Fluid outlet Luer Lock male
Door Opening Right hand side
Input Voltage 5 - 24 VDC
Fluid Pressure 30 psi (2.07 bar) MAX
Cycle Rate 300 cycles/min.
Mounting Port 1.0" (25.4mm) Channel
Viscosity Range 30K - 1300K cps
Wetted Parts Delrin
®
, Viton
®
, Nylon
DMP Valve options
Disposable Path
Material
Rotating Luer
Collars
6 Pitch DMP6-10 DMP6R-10
8 Pitch DMP8-10 DMP8R-10
16 Pitch DMP16-10 DMP16R-10
TS5000DMP-DCX
Rotary Microvalve
Techcon’s patented Disposable Material Path (DMP) valve con-
tains a disposable feed screw for easy maintenance and reli-
able dispensing.
With the feed screw made of Delrin
®
, the valve is designed for
use with two-compound and UV fluids. The DMP valve has a
hinged doorway that opens easily so the disposable feed path
can be removed, disposed of and replaced within seconds
while the line is still in operation. No cleaning or refurbishment
of the valve is required
The DMP-DCX is the perfect valve for applications where re-
moving the valve, for cleaning, is inconvenient and costly. With
the ability to remove and replace the disposable material path,
the valve maintains its accuracy over a greater period of time.
With less fluid build up to reduce wear-and-tear on the motor,
the valve’s usable lifetime is dramatically increased.
The TS5000DMP-DCX Series valve offers three options in feed
screwpitchtype:6,8and16pitch–allDMPinsertsaremade
available with a fixed or rotating color coded tip collar.
TS5000DMP - Right hand
opening. Left and front door
opening also available.
Optional encoder motors are
available for closed loop feed
back requirement.
TS5000 - Disposable path
available in 3 different pitches,
and with 3 different rotating
Luer collars.
Typical Applications
Solder paste, die attach, surface mount
adhesive, chip encapsulation, dam
writing, two-part epoxy, UV adhesive.
www.techcon.com
www.techcon.com www.techcon.com
17
TS7000-DCX
IMP Rotary Valves
TS7000-DCX Series
Interchangeable Material
Path (IMP) Rotary Valve
The TS7000-DCX Series IMP Rotary Valves uses a feed screw
to dispense fluid with a rotary displacement action, allowing
ultra-precise control of the dispensing process.
The valve's modular design allows quick and easy replace-
ment of the feed screw/chamber (cartridge assembly) without
removing the valve from the machine. In addition, the valve
cartridge assembly can be interchanged to be used with TS-
5000DMPfeedscrewinserts–The7000-DMPBKITretrotkit
is required.
The TS7000-DCX Series valve is available in 4 choices of
feed screw sizes (8-pitch, high output 8-pitch, 16-pitch and
32-pitch), all made of precision hardened tool steel. An en-
coder motor version is available for applications that require
closed-loop motor control with encoder feedback.
Typical Applications
Solder Paste, Die Attach, Surface Mount Adhe-
sive (SMA), Chip Encapsulation, Dam Writing,
Thermal Grease.
Recommended Controller
TS570R Digital Controller
Cartridge Assembly
Part Number Description
7090-9140 Cartridge Assembly, 32-Pitch
7090-9040 Cartridge Assembly, 16-Pitch
7090-9030 Cartridge Assembly, 8-Pitch
7090-9050 Cartridge Assembly, 8-Pitch HO
Valves
Part Number Description
TS7000-DCX-8 Rotary Valve, 8P Feed Screw
TS7000-DCX-8HO Rotary Valve, 8P High Output Feed Screw
TS7000-DCX-16 Rotary Valve, 16P Feed Screw
TS7000-DCX-32 Rotary Valve, 32P Feed Screw
TS7000E-8-DCX Rotary Valve, 8P Feed Screw
TS7000E-8HO-DCX Rotary Valve, 8P High Output Feed Screw
TS7000E-16-DCX Rotary Valve, 16P Feed Screw
TS7000E-32-DCX Rotary Valve, 32P Feed Screw
Key Features
• Accurateandrepeatabledispensingoutput
• Fieldreplaceablespareparts
• Quickandeasyfeedscrew/chambercartridgechangeover
• Closed-loopmotorcontrolwithencoderfeedback
(encoder version)
TS7000-DCX - Solar cell tabbing
Specifications - TS7000-DCX
Size (Imperial) 6.78" x 3.70" x 2.23"
Size (Metric) 172.2mm x 94mm x 56.6mm
Weight 0.96 lb. (438g)
Fluid Inlet Port Luer lock female
Fluid Outlet Port Luer taper and cap
Input Voltage Range 4 - 24VDC
Max Fluid Pressure 30 psi (2.07bar)
Operating Frequency 300+ cycles/min.
Mounting Port 1''/25.4mm channel
Viscosity Range 30K - 1 300Kcps
Wetted Parts 303SS, UHMWPE, Nylon
®