ESE_ES-series-Printer-2024.pdf - 第3页

E7 Much Fl exi ble Pr in ter Scale up – PCB 700mm x 610m m Retrofit Op tions To improve productivit y, a retrofi t opt ion appli cable PCB si ze 50mm x 50mm - 700m m x 610mm PCB Thickness 0.3mm t o 6mm Stencil s ize 650m…

100%1 / 10
E2
Economic & Smart Printer
Scale up – PCB 550mm x 510mm
Enhanced standard Features
The model E2 from US-2000X & 2000XQ is designed for a high performance of quality and a scaled-up capacity
ESE best cost-effective model with much more enhanced standard features integrated
Much stable solid frame & Table structure for a cost-saving and 3 stages conveyor system for high throughput
Technological Cleaning system – Dual vacuum and Cost-saving (40-50%) paper cleaning system
Improved Easy & Fast paper change mode
Standard E2 Wet print accuracy is 25 microns @ 6 sigma, Cpk ≥ 2 by 3
rd
party measurement system
A high-level E2+of standard E2 with 20 microns @ 6 sigma can be delivered for much precise printing performance
2D inspection
Less, Excess, Bridge, Position
SPI close loop
Auto Camera calibration
Auto Stencil Inspection
Auto Alignment
Accuracy measuring
Auto Alignment
PCB barcode traceability
ESE standard MES data
Program by network
PCB size
50mm x 50mm
- 550mm x 510mm
PCB Thickness
0.3mm to 6mm
Stencil size
550mm, 584mm, 650mm, 736mm
Cycle time
10sec / under optimized condition
Alignment accuracy
±
12.5 um @ 6 sigma
Printing repeatability
±
25 um @ 6 sigma , Cpk ≥2.0 [ **
E2+ : ±20 um @ 6 sigma , Cpk ≥2.0
]
* 2D inspection for solder excess, less, short and position error
* SPI closed loop with Kohyong, Parmi, TRI, Pemtron, Cyberoptics
* Production programming by network
* Auto stencil loading & positioning
* Auto camera calibration
* Auto Alignment before production
* Auto stencil inspection & cleaning for a containment area
* Auto Squeegee center position calibration
* Auto Alignment accuracy measuring for table & camera
* ESE standard MES data
* Program for Auto PCB support tooling for Gridlock, Quik
-Tool
* PCB barcode traceability by vision camera
E7
Much Flexible Printer
Scale up – PCB 700mm x 610mm
Retrofit Options
To improve productivity, a retrofit option applicable
PCB size
- 700mm x 610mm
PCB Thickness
Stencil size
Cycle time
Alignment accuracy
12.5 um @ 6 sigma
Printing repeatability
25 um @ 6 sigma , Cpk ≥2.0
The model E7 from US-7000X is designed for a flexible printing capacity of PCB 700mm by 610mm
based on E2’s stable printing repeatability
With enhanced standard features integrated on E2, standard 3 stages conveyor system for high throughput
and a high printing performance - alignment repeatability is ±12.5 microns @ 6 sigma, Cpk ≥ 2
by 3
rd
party measurement tooling and Wet print accuracy is 25 microns @ 6 sigma, Cpk ≥ 2
Touch screen monitor (22”)
Inside Temperature & Humidity display
Auto solder paste dispenser[ JAR or
Tube type]
Solder paste roll height check system
Automatic Support Pin placemt
Glue Dispenser
Programmable Y (Side) Clamp pressure
Easy clip Squeegee system (one
-touch)
Barcode Management (*RFID management available)
Side vacuum clamp tool
Side lifter for PCB edge support
Real Squeegee pressure closed loop
Real time squeegee pressure closed loop
Ionizer(Anti
-Static) PCB cleaning
Air conditioner
Temperature controller
Center Table vacuum pressure sensor
Area sensor for
satefy [Door both side ]
Auto solder paste dispenser (JAR, Syringe)
Solder roll height check
Glue dispenser
Auto support pin placement
Barcode management
(RFID management workable)
Inside temperature
& humidity display
Programmable Y (side) clamp
pressure
*Real squeegee pressure closed loop
*Real time squeegee pressure closed loop
Side vacuum clamp
Side lifter for PCB edge
support
Area sensor for safe
[Door both side ]
Customizing Vacuum nest
Additional optional item request, please contact ESE
H1
Ultimate speed & Smart performance
Back-to-Back Printer
Integrated shuttle on conveyor
Single printer or Back-to-Back configured line
PCB size
50mm x 50mm
- 350mm x 250mm [ * Optional 380mm x 280mm ]
PCB Thickness
0.3mm to 6mm
Stencil size
550mm, 584mm (23”), 650mm
Core Cycle time
5sec /
under optimized condition
Alignment accuracy
±
12.5 um @ 6 sigma
Printing repeatability
±
25 um @ 6 sigma , Cpk ≥2.0
Ultimate cycle time [ core 5sec ] and Qualified printing quality & repeatability printer
[ 20um@6sigma ] for single or back-to-back configurable printer
Much high productivity for single products – Top & Bottom printing together on each lane
Much flexible production for each different product for much faster productivity
All advanced & enhanced standard features of E2 & E7 applicable
Linear motor applied for stable & fast camera and 3 stages conveyor system as standard
Optional output conveyor integrated shuttle system for Back to Back line
Input conveyor shuttle applicable as Optional
Enhanced standard Features
2D inspection
Less, Excess, Bridge, Position
SPI close loop
Auto Camera calibration
Auto Stencil Inspection
Auto Alignment
Accuracy measuring
Auto Alignment
PCB barcode traceability
ESE standard MES data
Program by network
* 2D inspection for solder excess, less, short and position error
* SPI closed loop with Kohyong, Parmi, TRI, Pemtron, Cyberoptics
* Production programming by network
* Auto stencil loading & positioning
* Auto camera calibration
* Auto Alignment before production
* Auto stencil inspection & cleaning for a containment area
* Auto Squeegee center position calibration
* Auto Alignment accuracy measuring for table & camera
* ESE standard MES data
* Program for Auto PCB support tooling for Gridlock, Quik
-Tool
* PCB barcode traceability by vision camera