TK52658.PickupBasseMACS.pdf - 第3页

 Product Engineering Division SMT Sect ion Robotics Operations Y AMAHA MOTOR CO., L TD. MDOC-SOFT50732 3/7 1 M odel and V er sion Supported mode l and soft ware version for t his function are as follows. T able 1.1 Mode…

100%1 / 7
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50732
2/7
Contents
Contents ................................................................................................................................. 2
1 Model and Version .............................................................................................................. 3
2 Overview ............................................................................................................................. 3
3 Function Details .................................................................................................................. 4
3.1 Setting .......................................................................................................................... 4
3.2 Operation During Auto-running .................................................................................... 5
3.3 Utility Operation ............................................................................................................ 5
3.4 Precaution when you enable this function ................................................................... 6
4 Limitation ............................................................................................................................. 7
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50732
3/7
1 Model and Version
Supported model and software version for this function are as follows.
Table 1.1 Models and Version
Model Version Note
YSM10
YSM20/YSM20W/YSM20R
YSM40/YSM40R
V4.63STD R1.000 or later
YS12 Series
YS24/YS24X
V3.49STD R1.000 or later
2 Overview
This function performs BaseMACS not only at mounting but also at pickup, which improves
the pickup accuracy.
BaseMACS is a standard function that is able to correct a position with consideration of
thermal expansion of head by recognizing a mark fixed in the machine.
Product Engineering Division
SMT Section
Robotics Operations
YAMAHA MOTOR CO., LTD.
MDOC-SOFT50732
4/7
3 Function Details
3.1 Setting
1. Open the machine setting screen.
2. Confirm that [Installation Setting]-[Base MACS] is set to “Use”.
Fig 3.1.1 The BaseMACS setting screen
3. Select [Precision]-[Base MACS] and set [Pickup BaseMACS] to “Use”.
Make this setting by mounting table.
Fig 3.1.2 The Pickup BaseMACS setting
4. Save the setting, and close the screen.