Cubus_Specifications_V3.2.pdf - 第3页

CUBUS FeM - May 201 7 Page 3 of 6 Specifications Cubus Air Dryer / Re quired Air Quality ( Cu-Dry)* General Compressed air 6 bar-10 bar Min. Compressed air flow 18m 3 /h@6bar Typical Compressed air consumption With air f…

100%1 / 6
CUBUS FeM - May 2017
Page 2 of 6
Specifications
Machine Dimensions and Packaging
General
Regular
Large
Machine Dimensions
1140x110x2504 mm (w x d x h)
1591x1100x2504 mm (w x d x h)
Machine Weight
500 kg (without reels)
700 kg (without reels)
Packaging Dimension
Wooden crate / cardboard
Entire wooden crate
1350 x 1500 x 2700 mm (w x d x h)
1350 x 1550 x 2800 mm (w x d x h)
1800 x 1500 x 2700 mm (w x d x h)
1800 x 1550 x 2800 mm (w x d x h)
Packaging Weight
Wooden crate / cardboard
Entire wooden crate
130 kg
220 kg
180 kg
280 kg
Total Weight
Wooden crate / cardboard
Entire wooden crate
630 kg
720 kg
880 kg
980 kg
Dimension Drawings
CUBUS FeM - May 2017
Page 3 of 6
Specifications
Cubus Air Dryer / Required Air Quality (Cu-Dry)*
General
Compressed air
6 bar-10 bar
Min. Compressed air flow
18m
3
/h@6bar
Typical Compressed air
consumption
With air flow limiter: 12m
3
/h@6bar
Without air flow limiter: 18m
3
/h@6bar
Nominal approx. 6m
3
/h**
Air connection diameter
8mm
Required Air Quality
Class 1 Particulate
In each cubic meter of compressed air, the particulate count should not exceed 20,000 particles in
the 0.1 - 0.5 micron size range, 400 particles in the 0.5 - 1 micron size range and 10 particles in the 1 -
5 micron size range.
Class 2 Water
A pressure dew point (PDP) of -40°C or better is required. No liquid water is allowed.
Class 1 Oil
In each cubic meter of compressed air, not more than 0.01mg of oil is allowed. This is a total level for
liquid oil, oil aerosol and oil vapor.
* Cu-Dry is designed to maintain humidity inside the Cubus and must not be used as a Dry Cabinet
** Depending on the work load and environment
eStorage PC Requirement
Hardware Item
Minimum Requirement
Processor
Dual Core i3 Processor, 64 bit compatible
INTEL or AMD
Memory
2 Gigabyte
Strongly recommended: 4 Gigabyte
Graphic Card
DirectX 9.0 support
No high end graphic speed needed
Recommendation: do not use Nvidia, GUI artefacts might occur
Tip: graphic-card can be substituted with in-processor integrated GPU
Network Card
Two network cards required (GB-Link at least):
1x Connection to Cubus
1x Network connection
Hard Disk
200 Gigabyte hard disk, SSD preferred
Extensions
One USB Slot for Software Protection Dongle
Software Item:
Minimum Requirement:
Operating System
Microsoft Windows 7, 64 Bit version
Strongly recommended: Microsoft Windows 10, 64 Bit version
Database
A real server installation is recommended
CUBUS FeM - May 2017
Page 4 of 6
Specifications
Reel Specifications
A
Nominal diameter [mm]
F
Distance between two codes [mm]
B
Reel width [mm]
G
Barcode height [mm]
C
Reel bending downwards [mm]
H
Barcode label width [mm]
D
Barcode label area [mm]
J
Barcode label twist [°]
E
Barcode label area [mm]
K*
Reel bending upwards [mm]
Reel Dimensions / Shelf Pitch for 180 mm (7 inches) Reels
Tape width
[mm]
A min [mm]
A max [mm]
B min [mm]
B max [mm]
Recomm.
Shelf Pitch
<1000 g
Recomm.
Shelf Pitch
>1000 g
Recomm.
Shelf Pitch
>2000 g
8
100
178
10.5
14.4
25
30
35
12
18.4
30
35
40
16
22.4
35
40
45
24
30.4
45
45
55
32
38.4
50
50
65
44
50.4
65
65
75
56
62.4
75
75
85
C max [mm] <1000 g
C max [mm] >1000 g
C max [mm] >2000 g
Max Reel weight [g]
2
3
4
3500
K max [mm] <1000 g
K max [mm] >1000 g
K max [mm] >2000 g
Max Reel weight [g]
1
1
1
3500
K* The bending upwards is usually included in the height measurement of the reel. But the bending might be
different between the front or back side of the reel, in this case K must not be higher than the mentioned value.